APRS Track Direct

My position About ☰

reset

HS3LSE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3LSE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1786739262	3 Pkt	0 Pkt	-60 dBm	0.12 V
1786736535	3 Pkt	0 Pkt	-60 dBm	0.12 V
1786733809	2 Pkt	0 Pkt	-60 dBm	0.12 V
1786731083	3 Pkt	1 Pkt	-59 dBm	0.12 V
1786728356	3 Pkt	1 Pkt	-60 dBm	0.12 V
1786725630	3 Pkt	0 Pkt	-59 dBm	0.1 V
1786722903	11 Pkt	2 Pkt	-59 dBm	0.12 V
1786720176	20 Pkt	0 Pkt	-60 dBm	0.12 V
1786717449	9 Pkt	0 Pkt	-60 dBm	0.1 V
1786714723	8 Pkt	0 Pkt	-60 dBm	0.12 V
1786711996	3 Pkt	0 Pkt	-59 dBm	0.1 V
1786709269	3 Pkt	0 Pkt	-60 dBm	0.1 V
1786707391	3 Pkt	2 Pkt	-60 dBm	0.12 V
1786704664	3 Pkt	0 Pkt	-60 dBm	0.12 V
1786701938	3 Pkt	0 Pkt	-59 dBm	0.1 V
1786699212	3 Pkt	17 Pkt	-62 dBm	0.1 V
1786696484	3 Pkt	0 Pkt	-61 dBm	0.12 V
1786693758	3 Pkt	1 Pkt	-60 dBm	0.1 V
1786691031	3 Pkt	0 Pkt	-60 dBm	0.1 V
1786688305	4 Pkt	0 Pkt	-60 dBm	0.12 V
1786685578	6 Pkt	2 Pkt	-60 dBm	0.12 V
1786682852	2 Pkt	0 Pkt	-61 dBm	0.1 V
1786680125	3 Pkt	10 Pkt	-60 dBm	0.12 V
1786677398	2 Pkt	0 Pkt	-62 dBm	0.12 V
1786674672	4 Pkt	0 Pkt	-62 dBm	0.12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)