This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770120020 | 4.19 VDC | 475 | 8112 | 0 | 0 |
| 1770120005 | 4.19 VDC | 475 | 8106 | 0 | 0 |
| 1770119987 | 4.19 VDC | 472 | 8088 | 0 | 0 |
| 1770119962 | 4.19 VDC | 472 | 8081 | 0 | 0 |
| 1770119944 | 4.19 VDC | 472 | 8095 | 0 | 0 |
| 1770119929 | 4.19 VDC | 472 | 8121 | 0 | 0 |
| 1770119741 | 4.19 VDC | 469 | 8113 | 0 | 0 |
| 1770119726 | 4.19 VDC | 469 | 8111 | 0 | 0 |
| 1770119411 | 4.19 VDC | 468 | 8122 | 0 | 0 |
| 1770119288 | 4.19 VDC | 461 | 8085 | 0 | 0 |
| 1770119273 | 4.19 VDC | 461 | 8077 | 0 | 0 |
| 1770119244 | 4.19 VDC | 460 | 8068 | 0 | 0 |
| 1770119226 | 4.19 VDC | 460 | 8091 | 0 | 0 |
| 1770118406 | 4.17 VDC | 457 | 8096 | 0 | 0 |
| 1770117503 | 4.17 VDC | 456 | 8100 | 0 | 0 |
| 1770116600 | 4.19 VDC | 455 | 8097 | 0 | 0 |
| 1770115697 | 4.17 VDC | 454 | 8110 | 0 | 0 |
| 1770114794 | 4.17 VDC | 453 | 8112 | 0 | 0 |
| 1770113891 | 4.17 VDC | 452 | 8088 | 0 | 0 |
| 1770112988 | 4.17 VDC | 450 | 8134 | 0 | 0 |
| 1770112085 | 4.17 VDC | 449 | 8162 | 0 | 0 |
| 1770111182 | 4.19 VDC | 449 | 8143 | 0 | 0 |
| 1770110279 | 4.17 VDC | 449 | 8166 | 0 | 0 |
| 1770109376 | 4.17 VDC | 449 | 8132 | 0 | 0 |
| 1770108473 | 4.17 VDC | 449 | 8140 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)