APRS Track Direct

My position About ☰

reset

TA1DF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1DF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1745130588	0.19 Load	43.82 DegC	1256 Mb	184 Pkt	178 Pkt
1745130287	0.14 Load	44.79 DegC	1247 Mb	917 Pkt	143 Pkt
1745130073	0.21 Load	43.82 DegC	1256 Mb	1337 Pkt	86 Pkt
1745129688	0.28 Load	43.82 DegC	1258 Mb	596 Pkt	182 Pkt
1745129398	0.17 Load	42.84 DegC	1258 Mb	1041 Pkt	38 Pkt
1745129088	0.2 Load	43.82 DegC	1256 Mb	1464 Pkt	104 Pkt
1745128866	0.11 Load	42.84 DegC	1249 Mb	406 Pkt	132 Pkt
1745128583	0.14 Load	43.82 DegC	1258 Mb	709 Pkt	127 Pkt
1745128409	0.19 Load	42.84 DegC	1258 Mb	691 Pkt	115 Pkt
1745127887	0.14 Load	43.33 DegC	1250 Mb	516 Pkt	267 Pkt
1745127587	0.14 Load	42.36 DegC	1257 Mb	209 Pkt	184 Pkt
1745127288	0.16 Load	43.33 DegC	1247 Mb	211 Pkt	213 Pkt
1745126988	0.19 Load	42.36 DegC	1261 Mb	211 Pkt	216 Pkt
1745126687	0.14 Load	42.84 DegC	1250 Mb	228 Pkt	195 Pkt
1745126387	0.18 Load	42.84 DegC	1249 Mb	196 Pkt	192 Pkt
1745126088	0.23 Load	43.33 DegC	1252 Mb	740 Pkt	176 Pkt
1745125787	0.21 Load	43.33 DegC	1254 Mb	508 Pkt	216 Pkt
1745125487	0.23 Load	42.84 DegC	1245 Mb	199 Pkt	199 Pkt
1745125188	0.14 Load	43.33 DegC	1253 Mb	202 Pkt	192 Pkt
1745124887	0.12 Load	44.3 DegC	1258 Mb	276 Pkt	242 Pkt
1745124587	0.16 Load	42.84 DegC	1253 Mb	194 Pkt	180 Pkt
1745124288	0.19 Load	44.3 DegC	1252 Mb	209 Pkt	197 Pkt
1745124027	0.18 Load	42.84 DegC	1254 Mb	767 Pkt	143 Pkt
1745123687	0.18 Load	44.3 DegC	1255 Mb	196 Pkt	188 Pkt
1745123387	0.24 Load	42.36 DegC	1263 Mb	185 Pkt	191 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)