APRS Track Direct

My position About ☰

reset

HS3LSE-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3LSE-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274480	35 Pkt	0 Pkt	-74 dBm	4.49 V
1778056618	3 Pkt	9 Pkt	-75 dBm	4.68 V
1778053891	2 Pkt	0 Pkt	-77 dBm	5.04 V
1778051170	3 Pkt	0 Pkt	-76 dBm	5.07 V
1778048437	2 Pkt	2 Pkt	-75 dBm	5.07 V
1778045711	1 Pkt	0 Pkt	-77 dBm	5.07 V
1778045099	3 Pkt	0 Pkt	-76 dBm	5.07 V
1778042373	1 Pkt	0 Pkt	-75 dBm	5.07 V
1778039646	4 Pkt	0 Pkt	-74 dBm	5.07 V
1778036920	2 Pkt	0 Pkt	-75 dBm	4.72 V
1778034193	2 Pkt	0 Pkt	-73 dBm	5.07 V
1778031467	3 Pkt	1 Pkt	-75 dBm	5.07 V
1778028740	5 Pkt	0 Pkt	-72 dBm	5.07 V
1778026014	5 Pkt	3 Pkt	-73 dBm	4.72 V
1778023287	3 Pkt	4 Pkt	-77 dBm	5.09 V
1778020560	3 Pkt	0 Pkt	-73 dBm	5.09 V
1778017834	3 Pkt	0 Pkt	-78 dBm	4.55 V
1778015107	2 Pkt	0 Pkt	-75 dBm	4.72 V
1778013838	3 Pkt	2 Pkt	-76 dBm	5.09 V
1778011111	3 Pkt	0 Pkt	-75 dBm	5.09 V
1778008385	3 Pkt	2 Pkt	-72 dBm	5.09 V
1778005658	3 Pkt	3 Pkt	-76 dBm	4.74 V
1778002931	3 Pkt	1 Pkt	-77 dBm	5.09 V
1778000205	3 Pkt	0 Pkt	-75 dBm	5 V
1777997478	2 Pkt	2 Pkt	-77 dBm	5.09 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)