APRS Track Direct

My position About ☰

reset

UA0LGY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UA0LGY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	cpuT*	inaT*	trxT*	Q*
1790673583	42.68 degC	21.79 degC	32.98 degC	-1
1790673313	42.48 degC	21.44 degC	33.02 degC	-1
1790672983	42.54 degC	21.16 degC	33.12 degC	-1
1790672683	43.05 degC	21.49 degC	33.22 degC	-1
1790672373	43.11 degC	21.96 degC	33.28 degC	-1
1790672073	42.96 degC	21.96 degC	33.34 degC	-1
1790671773	42.63 degC	21.57 degC	33.35 degC	-1
1790671513	42.36 degC	21.25 degC	32.6 degC	-1
1790671173	42.78 degC	21.53 degC	32.54 degC	-1
1790670863	42.88 degC	21.98 degC	32.5 degC	-1
1790670573	42.48 degC	21.88 degC	32.5 degC	-1
1790670263	42.09 degC	21.51 degC	32.5 degC	-1
1790669963	42.22 degC	21.19 degC	32.5 degC	-1
1790669683	42.48 degC	21.39 degC	32.52 degC	-1
1790669353	42.84 degC	21.86 degC	32.5 degC	-1
1790669053	42.54 degC	21.91 degC	32.5 degC	-1
1790668753	42.09 degC	21.55 degC	32.5 degC	-1
1790668453	42.3 degC	21.23 degC	32.5 degC	-1
1790668153	42.33 degC	21.34 degC	32.51 degC	-1
1790667843	42.78 degC	21.83 degC	32.5 degC	-1
1790667543	42.54 degC	21.95 degC	32.5 degC	-1
1790667243	42.3 degC	21.61 degC	32.5 degC	-1
1790666943	42.19 degC	21.29 degC	32.5 degC	-1
1790666643	42.3 degC	21.25 degC	32.5 degC	-1
1790666333	42.87 degC	21.72 degC	32.5 degC	-1

*Used Equation Coefficients:

cpuT: 0, 1, 0

inaT: 0, 1, 0

trxT: 0, 1, 0

fan: 0, 1, 0

Q: 0, 0.043, -1

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)