This is the latest recevied telemetry packets stored in our database for station/object DL2YCP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791754276 | 22.2 deg C | 46.2 % | 1011.5 hPa | 0 | 0 |
| 1791753378 | 22.3 deg C | 46.3 % | 1011.4 hPa | 0 | 0 |
| 1791752475 | 22.4 deg C | 46.4 % | 1011.4 hPa | 0 | 0 |
| 1791751573 | 22.5 deg C | 46.4 % | 1011.2 hPa | 0 | 0 |
| 1791750676 | 22.6 deg C | 46.2 % | 1011.2 hPa | 0 | 0 |
| 1791749778 | 22.6 deg C | 46.2 % | 1011 hPa | 0 | 0 |
| 1791748869 | 22.6 deg C | 46.2 % | 1010.9 hPa | 0 | 0 |
| 1791747962 | 22.6 deg C | 46.4 % | 1010.8 hPa | 0 | 0 |
| 1791747066 | 22.6 deg C | 46.4 % | 1010.6 hPa | 0 | 0 |
| 1791745842 | 22.5 deg C | 46.5 % | 1010.5 hPa | 0 | 0 |
| 1791744947 | 22.4 deg C | 46.6 % | 1010.4 hPa | 0 | 0 |
| 1791744050 | 22.3 deg C | 46.7 % | 1010.2 hPa | 0 | 0 |
| 1791741347 | 22.4 deg C | 46.7 % | 1009.6 hPa | 0 | 0 |
| 1791740447 | 22.3 deg C | 46.9 % | 1009.6 hPa | 0 | 0 |
| 1791739552 | 22.3 deg C | 47.1 % | 1009.3 hPa | 0 | 0 |
| 1791738649 | 22.2 deg C | 47.2 % | 1009.2 hPa | 0 | 0 |
| 1791737744 | 22.2 deg C | 47.2 % | 1009 hPa | 0 | 0 |
| 1791736847 | 22.2 deg C | 47 % | 1008.7 hPa | 0 | 0 |
| 1791735952 | 22.2 deg C | 47 % | 1008.4 hPa | 0 | 0 |
| 1791735049 | 22.2 deg C | 47.1 % | 1008.2 hPa | 0 | 0 |
| 1791733811 | 22.1 deg C | 47.1 % | 1008 hPa | 0 | 0 |
| 1791732909 | 22.1 deg C | 47.1 % | 1007.8 hPa | 0 | 0 |
| 1791732003 | 22.1 deg C | 47 % | 1007.8 hPa | 0 | 0 |
| 1791731102 | 22.1 deg C | 47.2 % | 1007.7 hPa | 0 | 0 |
| 1791730207 | 22.1 deg C | 47.5 % | 1007.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)