APRS Track Direct

My position About ☰

reset

ED4ZAI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED4ZAI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732286044	14.18 Volt	110 Pkt	70 Pkt	85 Pcnt	13 C
1732284245	14.4 Volt	100 Pkt	70 Pkt	86 Pcnt	12.5 C
1732282444	14.4 Volt	110 Pkt	60 Pkt	89 Pcnt	12.5 C
1732280644	14.4 Volt	130 Pkt	70 Pkt	82 Pcnt	12 C
1732278845	14.4 Volt	130 Pkt	90 Pkt	86 Pcnt	12 C
1732277044	14.4 Volt	110 Pkt	70 Pkt	96 Pcnt	11.5 C
1732275244	14.18 Volt	100 Pkt	60 Pkt	91 Pcnt	11 C
1732273445	12.83 Volt	90 Pkt	50 Pkt	91 Pcnt	11 C
1732271644	13.05 Volt	100 Pkt	70 Pkt	93 Pcnt	11 C
1732269844	12.98 Volt	90 Pkt	60 Pkt	91 Pcnt	10.5 C
1732268045	12.15 Volt	80 Pkt	50 Pkt	96 Pcnt	10.5 C
1732266245	12.15 Volt	80 Pkt	50 Pkt	97 Pcnt	10.5 C
1732264445	12.08 Volt	90 Pkt	60 Pkt	86 Pcnt	10.5 C
1732262645	12.15 Volt	110 Pkt	70 Pkt	86 Pcnt	10.5 C
1732260845	11.85 Volt	90 Pkt	60 Pkt	90 Pcnt	10.5 C
1732259045	12.15 Volt	90 Pkt	50 Pkt	91 Pcnt	10.5 C
1732257245	12.15 Volt	90 Pkt	50 Pkt	93 Pcnt	10.5 C
1732255445	12.15 Volt	90 Pkt	50 Pkt	95 Pcnt	10.5 C
1732253645	12.15 Volt	80 Pkt	50 Pkt	96 Pcnt	10.5 C
1732251845	12.15 Volt	80 Pkt	50 Pkt	94 Pcnt	10.5 C
1732250045	12.15 Volt	100 Pkt	50 Pkt	89 Pcnt	10.5 C
1732248245	12.15 Volt	110 Pkt	60 Pkt	85 Pcnt	10.5 C
1732246445	12.15 Volt	100 Pkt	60 Pkt	87 Pcnt	10.5 C
1732244645	12.23 Volt	100 Pkt	60 Pkt	87 Pcnt	10.5 C
1732242845	12.23 Volt	90 Pkt	50 Pkt	89 Pcnt	10.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)