This is the latest recevied telemetry packets stored in our database for station/object F4LZC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786746193 | 12 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786745289 | 11 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786744470 | 6 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786743567 | 5 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786742663 | 4 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786741759 | 3 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786740856 | 2 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786739952 | 1 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786739049 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786738145 | 1000 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786737241 | 999 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786736342 | 998 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786735434 | 997 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786734530 | 996 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786733627 | 995 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786732723 | 994 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786731819 | 993 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786730915 | 992 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786730012 | 991 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786729108 | 990 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786728205 | 989 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786727301 | 988 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786726397 | 987 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786725494 | 986 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786724590 | 985 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)