This is the latest recevied telemetry packets stored in our database for station/object KI5NYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732295641 | 51.54 | 0.06 | 412 | 0 | 0 |
| 1732295041 | 51.54 | 0.05 | 418 | 0 | 0 |
| 1732294441 | 51 | 0.04 | 413 | 0 | 0 |
| 1732293841 | 51 | 0.06 | 415 | 0 | 0 |
| 1732293241 | 50.46 | 0.16 | 415 | 0 | 0 |
| 1732292641 | 50.46 | 0.03 | 412 | 0 | 0 |
| 1732292041 | 50.46 | 0.12 | 415 | 0 | 0 |
| 1732291441 | 50.46 | 0.08 | 414 | 0 | 0 |
| 1732290841 | 50.46 | 0.12 | 416 | 0 | 0 |
| 1732290240 | 50.46 | 0.08 | 416 | 0 | 0 |
| 1732289640 | 51 | 0.08 | 417 | 0 | 0 |
| 1732289040 | 50.46 | 0.12 | 416 | 0 | 0 |
| 1732288440 | 50.46 | 0.06 | 415 | 0 | 0 |
| 1732287840 | 51 | 0.09 | 416 | 0 | 0 |
| 1732287240 | 50.46 | 0.13 | 415 | 0 | 0 |
| 1732286640 | 50.46 | 0.1 | 415 | 0 | 0 |
| 1732286040 | 50.46 | 0.11 | 417 | 0 | 0 |
| 1732285440 | 50.46 | 0.09 | 416 | 0 | 0 |
| 1732284840 | 50.46 | 0.09 | 414 | 0 | 0 |
| 1732284240 | 50.46 | 0.08 | 418 | 0 | 0 |
| 1732283640 | 50.46 | 0.05 | 413 | 0 | 0 |
| 1732283040 | 50.46 | 0.17 | 412 | 0 | 0 |
| 1732282440 | 49.93 | 0.09 | 415 | 0 | 0 |
| 1732281839 | 50.46 | 0.07 | 422 | 0 | 0 |
| 1732281239 | 49.93 | 0.03 | 415 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)