This is the latest recevied telemetry packets stored in our database for station/object YD1AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786743131 | 29 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1786741231 | 30 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1786739331 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1786738581 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1786736681 | 29 °C | 59 %RH | 1010 hPa | 0 | 0 |
| 1786734781 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1786732881 | 30 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1786730981 | 30 °C | 57 %RH | 1010 hPa | 0 | 0 |
| 1786730322 | 30 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1786728774 | 30 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1786726874 | 30 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1786724974 | 30 °C | 57 %RH | 1011 hPa | 0 | 0 |
| 1786723074 | 30 °C | 55 %RH | 1011 hPa | 0 | 0 |
| 1786719780 | 30 °C | 55 %RH | 1011 hPa | 0 | 0 |
| 1786717880 | 30 °C | 55 %RH | 1011 hPa | 0 | 0 |
| 1786715980 | 30 °C | 54 %RH | 1010 hPa | 0 | 0 |
| 1786714080 | 31 °C | 55 %RH | 1010 hPa | 0 | 0 |
| 1786712180 | 31 °C | 53 %RH | 1010 hPa | 0 | 0 |
| 1786710280 | 31 °C | 53 %RH | 1010 hPa | 0 | 0 |
| 1786708716 | 31 °C | 51 %RH | 1009 hPa | 0 | 0 |
| 1786706816 | 32 °C | 50 %RH | 1009 hPa | 0 | 0 |
| 1786705192 | 32 °C | 48 %RH | 1008 hPa | 0 | 0 |
| 1786703292 | 34 °C | 44 %RH | 1008 hPa | 0 | 0 |
| 1786701392 | 36 °C | 40 %RH | 1008 hPa | 0 | 0 |
| 1786700219 | 37 °C | 38 %RH | 1008 hPa | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)