APRS Track Direct

My position About ☰

reset

ED4YAG-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED4YAG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Rx1h*	Dg1h*	Eff*	Rx10m*	Dg10m*
1790638833	240 Pkt	70 Pkt	90 Pcnt	33 Pkt	7 Pkt
1790637632	320 Pkt	110 Pkt	90 Pcnt	43 Pkt	12 Pkt
1790636431	360 Pkt	120 Pkt	90 Pcnt	44 Pkt	13 Pkt
1790635230	330 Pkt	110 Pkt	90 Pcnt	76 Pkt	25 Pkt
1790634028	230 Pkt	80 Pkt	90 Pcnt	77 Pkt	27 Pkt
1790632827	190 Pkt	70 Pkt	90 Pcnt	32 Pkt	12 Pkt
1790631626	180 Pkt	70 Pkt	90 Pcnt	19 Pkt	3 Pkt
1790630425	190 Pkt	70 Pkt	90 Pcnt	39 Pkt	14 Pkt
1790629224	200 Pkt	70 Pkt	90 Pcnt	23 Pkt	9 Pkt
1790626822	210 Pkt	70 Pkt	90 Pcnt	41 Pkt	12 Pkt
1790625620	200 Pkt	60 Pkt	90 Pcnt	28 Pkt	11 Pkt
1790624419	200 Pkt	50 Pkt	90 Pcnt	30 Pkt	6 Pkt
1790623218	210 Pkt	60 Pkt	90 Pcnt	37 Pkt	7 Pkt
1790622017	230 Pkt	90 Pkt	90 Pcnt	31 Pkt	7 Pkt
1790620816	250 Pkt	100 Pkt	90 Pcnt	31 Pkt	12 Pkt
1790619615	250 Pkt	80 Pkt	90 Pcnt	52 Pkt	25 Pkt
1790618413	230 Pkt	70 Pkt	89 Pcnt	43 Pkt	18 Pkt
1790617212	180 Pkt	50 Pkt	89 Pcnt	27 Pkt	3 Pkt
1790616011	160 Pkt	50 Pkt	89 Pcnt	44 Pkt	17 Pkt
1790614810	160 Pkt	50 Pkt	89 Pcnt	20 Pkt	6 Pkt
1790613609	170 Pkt	50 Pkt	89 Pcnt	24 Pkt	3 Pkt
1790612408	180 Pkt	50 Pkt	89 Pcnt	43 Pkt	18 Pkt
1790611206	180 Pkt	50 Pkt	89 Pcnt	18 Pkt	5 Pkt
1790610005	170 Pkt	50 Pkt	89 Pcnt	39 Pkt	5 Pkt
1790608804	160 Pkt	50 Pkt	90 Pcnt	36 Pkt	13 Pkt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff: 0, 1, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)