APRS Track Direct

My position About ☰

reset

E22KKC-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1836274144	53 Pkt	0 Pkt	-47 dBm	0.08 V
1766212161	1 Pkt	0 Pkt	-52 dBm	0.08 V
1766210336	1 Pkt	0 Pkt	-53 dBm	0.08 V
1766208511	5 Pkt	0 Pkt	-53 dBm	0.08 V
1766206686	17 Pkt	0 Pkt	-54 dBm	0.08 V
1766204860	28 Pkt	2 Pkt	-51 dBm	0.08 V
1766203035	24 Pkt	2 Pkt	-50 dBm	0.08 V
1766201209	33 Pkt	0 Pkt	-50 dBm	0.08 V
1766199384	24 Pkt	0 Pkt	-50 dBm	0.08 V
1766197558	28 Pkt	0 Pkt	-49 dBm	0.08 V
1766195732	28 Pkt	0 Pkt	-49 dBm	0.08 V
1766193907	24 Pkt	2 Pkt	-49 dBm	0.08 V
1766192081	1 Pkt	0 Pkt	-48 dBm	0.08 V
1766190194	29 Pkt	1 Pkt	-49 dBm	0.08 V
1766188368	37 Pkt	2 Pkt	-48 dBm	0.08 V
1766186543	35 Pkt	1 Pkt	-50 dBm	0.08 V
1766184716	24 Pkt	2 Pkt	-50 dBm	0.08 V
1766182890	30 Pkt	0 Pkt	-49 dBm	0.08 V
1766181064	25 Pkt	0 Pkt	-50 dBm	0.08 V
1766179239	23 Pkt	2 Pkt	-49 dBm	0.08 V
1766177413	30 Pkt	0 Pkt	-50 dBm	0.08 V
1766175587	25 Pkt	0 Pkt	-49 dBm	0.08 V
1766173761	40 Pkt	0 Pkt	-50 dBm	0.08 V
1766171935	45 Pkt	0 Pkt	-50 dBm	0.08 V
1766170109	38 Pkt	0 Pkt	-49 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)