APRS Track Direct

My position About ☰

reset

DL4MDW-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4MDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Vsol*	Pbat*	Temp*	AirP*
1836274856	4.07 V	0 V	-22 mW	11.88 degC	98237.5 Pa
1836274736	4.08 V	0 V	-22 mW	11.91 degC	98250 Pa
1836274616	4.08 V	0 V	-24 mW	11.78 degC	98250 Pa
1836274586	4.07 V	0.01 V	-22 mW	11.88 degC	98175 Pa
1836274496	4.08 V	0 V	-22 mW	11.78 degC	98250 Pa
1836274466	4.07 V	0 V	-22 mW	11.83 degC	98187.5 Pa
1836274376	4.08 V	0 V	-22 mW	11.96 degC	98262.5 Pa
1836274346	4.07 V	0 V	-22 mW	11.81 degC	98200 Pa
1836274256	4.08 V	0 V	-22 mW	11.91 degC	98262.5 Pa
1836274226	4.07 V	0 V	-24 mW	11.83 degC	98225 Pa
1836274136	4.08 V	0 V	-22 mW	11.86 degC	98275 Pa
1836274016	4.08 V	0 V	-22 mW	11.88 degC	98275 Pa
1836273896	4.08 V	0 V	-22 mW	11.96 degC	98287.5 Pa
1762191539	2.53 V	0.01 V	-52 mW	23.02 degC	101512.5 Pa
1762191419	2.55 V	0.01 V	-52 mW	22.6 degC	101512.5 Pa
1762191299	2.58 V	0.01 V	-54 mW	22.09 degC	101512.5 Pa
1762191179	2.6 V	0.01 V	-56 mW	21.73 degC	101512.5 Pa
1762191059	2.62 V	0.01 V	-56 mW	21.28 degC	101525 Pa
1762190939	2.65 V	0.01 V	-58 mW	20.84 degC	101537.5 Pa
1762190819	2.67 V	0.01 V	-60 mW	20.4 degC	101537.5 Pa
1762190579	2.72 V	0.01 V	-62 mW	19.52 degC	101525 Pa
1762190458	2.74 V	0.01 V	-64 mW	19.11 degC	101525 Pa
1762190338	2.77 V	0.01 V	-64 mW	18.7 degC	101525 Pa
1762190218	2.79 V	0.01 V	-66 mW	18.35 degC	101512.5 Pa
1762190098	2.82 V	0.01 V	-66 mW	17.92 degC	101525 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Pbat: 0, 2, -4096

Temp: 0, 0.01, 0

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)