This is the latest recevied telemetry packets stored in our database for station/object CAVECR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_B.01* | 0* | 0* | 0.02* | 0* |
|---|---|---|---|---|---|
| 1782513625 | 4.29 VDC | 21.86 VDC | 0 | 0 | 0 |
| 1782513024 | 4.29 VDC | 21.84 VDC | 0 | 0 | 0 |
| 1782512427 | 4.29 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1782511823 | 4.29 VDC | 21.88 VDC | 0 | 0 | 0 |
| 1782511223 | 4.29 VDC | 21.84 VDC | 0 | 0 | 0 |
| 1782510626 | 4.29 VDC | 21.82 VDC | 0 | 0 | 0 |
| 1782510022 | 4.29 VDC | 21.86 VDC | 0 | 0 | 0 |
| 1782509422 | 4.29 VDC | 21.74 VDC | 0 | 0 | 0 |
| 1782508822 | 4.29 VDC | 21.7 VDC | 0 | 0 | 0 |
| 1782508222 | 4.29 VDC | 21.7 VDC | 0 | 0 | 0 |
| 1782507624 | 4.29 VDC | 21.68 VDC | 0 | 0 | 0 |
| 1782507021 | 4.3 VDC | 21.68 VDC | 0 | 0 | 0 |
| 1782506420 | 4.3 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1782505820 | 4.3 VDC | 21.82 VDC | 0 | 0 | 0 |
| 1782505219 | 4.3 VDC | 21.84 VDC | 0 | 0 | 0 |
| 1782504618 | 4.3 VDC | 21.84 VDC | 0 | 0 | 0 |
| 1782504018 | 4.3 VDC | 21.76 VDC | 0 | 0 | 0 |
| 1782503417 | 4.31 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1782502816 | 4.31 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1782502216 | 4.32 VDC | 21.76 VDC | 0 | 0 | 0 |
| 1782501615 | 4.31 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1782501014 | 4.32 VDC | 21.64 VDC | 0 | 0 | 0 |
| 1782500414 | 4.33 VDC | 21.78 VDC | 0 | 0 | 0 |
| 1782499814 | 4.34 VDC | 21.68 VDC | 0 | 0 | 0 |
| 1782499214 | 4.34 VDC | 21.72 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_B.01: 0, 0.01, 0
0: 0, 0.02, 0
0: 0, 1, 0
0.02: 0, 1, 0
0: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)