APRS Track Direct

My position About ☰

reset

FW0727 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object FW0727. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Ground*	Inside*	PV_P*	PV_U*	Bat*
1782500207	22.5 degC	29 degC	0 W	0.13 V	4.18 V
1782499863	22.5 degC	29.5 degC	0 W	0.2 V	4.19 V
1782499518	23 degC	29.5 degC	0 W	0.35 V	4.19 V
1782499174	23 degC	29.5 degC	0 W	0.68 V	4.19 V
1782498821	23 degC	29.5 degC	0 W	1.35 V	4.19 V
1782498146	23 degC	30 degC	0 W	3.1 V	4.2 V
1782497792	23 degC	30 degC	0 W	3.73 V	4.2 V
1782497446	23 degC	30 degC	0 W	4.18 V	4.2 V
1782496114	23 degC	31 degC	0.03 W	4.8 V	4.21 V
1782495441	23 degC	31.5 degC	0.05 W	4.83 V	4.21 V
1782495096	23 degC	31.5 degC	0.06 W	4.83 V	4.21 V
1782494751	23 degC	31.5 degC	0.07 W	4.83 V	4.22 V
1782494406	23 degC	32 degC	0.08 W	4.85 V	4.22 V
1782494062	23 degC	32 degC	0.09 W	4.75 V	4.23 V
1782493709	23 degC	32 degC	0.11 W	4.9 V	4.23 V
1782493364	23 degC	32.5 degC	0.15 W	4.9 V	4.23 V
1782493019	22.5 degC	32.5 degC	0.15 W	4.63 V	4.24 V
1782492674	22.5 degC	32.5 degC	0.2 W	4.7 V	4.24 V
1782492328	22.5 degC	32.5 degC	0.19 W	4.63 V	4.24 V
1782491984	22.5 degC	32.5 degC	0.25 W	4.63 V	4.24 V
1782491638	22.5 degC	32.5 degC	0.15 W	4.7 V	4.24 V
1782491293	22.5 degC	33 degC	0.18 W	4.8 V	4.24 V
1782490948	22.5 degC	33 degC	0.16 W	4.6 V	4.24 V
1782490604	22.5 degC	33 degC	0.2 W	4.9 V	4.24 V
1782490250	22 degC	33 degC	0.29 W	4.63 V	4.24 V

*Used Equation Coefficients:

Ground: 0, 0.5, -25

Inside: 0, 0.5, -25

PV_P: 0, 0.01, 0

PV_U: 0, 0.025, 0

Bat: 0, 0.01, 2.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)