This is the latest recevied telemetry packets stored in our database for station/object E24ORD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1745034632 | 3 Pkt | 4 Pkt | 20 Pkt | -91 dBm | 51 % |
| 1745032818 | 0 Pkt | 0 Pkt | 3 Pkt | -86 dBm | 38 % |
| 1745032527 | 0 Pkt | 0 Pkt | 3 Pkt | -88 dBm | 38 % |
| 1745032293 | 0 Pkt | 0 Pkt | 2 Pkt | -86 dBm | 38 % |
| 1745031539 | 1 Pkt | 1 Pkt | 7 Pkt | -91 dBm | 40 % |
| 1745030911 | 0 Pkt | 0 Pkt | 6 Pkt | -88 dBm | 44 % |
| 1745030303 | 0 Pkt | 0 Pkt | 7 Pkt | -89 dBm | 45 % |
| 1745029606 | 0 Pkt | 0 Pkt | 6 Pkt | -89 dBm | 47 % |
| 1745028917 | 0 Pkt | 0 Pkt | 12 Pkt | -92 dBm | 51 % |
| 1745028384 | 0 Pkt | 0 Pkt | 3 Pkt | -86 dBm | 64 % |
| 1745028268 | 1 Pkt | 0 Pkt | 7 Pkt | -89 dBm | 45 % |
| 1745027861 | 0 Pkt | 0 Pkt | 3 Pkt | -92 dBm | 41 % |
| 1745027786 | 1 Pkt | 0 Pkt | 7 Pkt | -81 dBm | 41 % |
| 1745027473 | 0 Pkt | 0 Pkt | 5 Pkt | -93 dBm | 73 % |
| 1745027093 | 0 Pkt | 0 Pkt | 1 Pkt | -91 dBm | 45 % |
| 1745026941 | 0 Pkt | 0 Pkt | 6 Pkt | -92 dBm | 46 % |
| 1745026750 | 1 Pkt | 0 Pkt | 8 Pkt | -92 dBm | 42 % |
| 1745026238 | 0 Pkt | 0 Pkt | 3 Pkt | -91 dBm | 41 % |
| 1745026155 | 0 Pkt | 0 Pkt | 7 Pkt | -89 dBm | 41 % |
| 1745025722 | 0 Pkt | 3 Pkt | 23 Pkt | -94 dBm | 40 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)