APRS Track Direct

My position About ☰

reset

DM2HEY-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HEY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1744792807	13.51 Volt	100 Pkt	50 Pkt	47 Pcnt
1744791908	13.51 Volt	100 Pkt	60 Pkt	44 Pcnt
1744791007	13.51 Volt	100 Pkt	60 Pkt	37 Pcnt
1744790107	13.51 Volt	90 Pkt	50 Pkt	30 Pcnt
1744789208	13.51 Volt	70 Pkt	30 Pkt	23 Pcnt
1744788308	13.51 Volt	50 Pkt	20 Pkt	19 Pcnt
1744787408	13.51 Volt	50 Pkt	20 Pkt	21 Pcnt
1744786508	13.51 Volt	80 Pkt	40 Pkt	33 Pcnt
1744785608	13.51 Volt	110 Pkt	60 Pkt	45 Pcnt
1744784708	13.51 Volt	130 Pkt	70 Pkt	61 Pcnt
1744783808	13.51 Volt	130 Pkt	70 Pkt	67 Pcnt
1744782908	13.51 Volt	120 Pkt	50 Pkt	73 Pcnt
1744782008	13.51 Volt	100 Pkt	30 Pkt	65 Pcnt
1744781108	13.51 Volt	80 Pkt	20 Pkt	60 Pcnt
1744780208	13.51 Volt	60 Pkt	20 Pkt	46 Pcnt
1744779308	13.51 Volt	30 Pkt	10 Pkt	27 Pcnt
1744778408	13.51 Volt	30 Pkt	10 Pkt	31 Pcnt
1744777508	13.51 Volt	30 Pkt	10 Pkt	32 Pcnt
1744776608	13.51 Volt	60 Pkt	20 Pkt	56 Pcnt
1744775708	13.51 Volt	90 Pkt	30 Pkt	71 Pcnt
1744774808	13.51 Volt	90 Pkt	30 Pkt	62 Pcnt
1744773908	13.51 Volt	90 Pkt	30 Pkt	59 Pcnt
1744773008	13.51 Volt	70 Pkt	20 Pkt	48 Pcnt
1744772108	13.51 Volt	60 Pkt	20 Pkt	39 Pcnt
1744771208	13.51 Volt	60 Pkt	20 Pkt	39 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)