This is the latest recevied telemetry packets stored in our database for station/object DL7AD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750125894 | 2536 | 0 | 106 | 743 | 8124 |
| 1750125834 | 2576 | 0 | 106 | 746 | 8122 |
| 1750125773 | 2608 | 0 | 108 | 750 | 8123 |
| 1750125713 | 2632 | 0 | 111 | 754 | 8123 |
| 1750125653 | 2664 | 0 | 113 | 758 | 8123 |
| 1750125593 | 2688 | 0 | 116 | 762 | 8123 |
| 1750125534 | 2681 | 0 | 118 | 766 | 8123 |
| 1750125476 | 2676 | 0 | 120 | 771 | 8124 |
| 1750125417 | 2696 | 0 | 123 | 776 | 8124 |
| 1750125361 | 2692 | 0 | 129 | 782 | 8124 |
| 1750125307 | 2704 | 0 | 132 | 788 | 8124 |
| 1750125243 | 2728 | 0 | 133 | 790 | 8124 |
| 1750125183 | 2752 | 0 | 135 | 794 | 8124 |
| 1750125126 | 2760 | 0 | 140 | 799 | 8125 |
| 1750125063 | 2792 | 0 | 139 | 800 | 8124 |
| 1750125006 | 2800 | 0 | 143 | 806 | 8124 |
| 1750124946 | 2816 | 0 | 142 | 810 | 8125 |
| 1750124873 | 2808 | 0 | 170 | 829 | 8124 |
| 1750124813 | 2816 | 0 | 171 | 830 | 8124 |
| 1750124753 | 2832 | 0 | 172 | 831 | 8124 |
| 1750124692 | 2848 | 0 | 173 | 832 | 8125 |
| 1750124632 | 2856 | 0 | 175 | 833 | 8124 |
| 1750124572 | 2872 | 0 | 176 | 834 | 8124 |
| 1750124512 | 2880 | 0 | 178 | 835 | 8125 |
| 1750124452 | 2894 | 0 | 178 | 836 | 8124 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)