APRS Track Direct

My position About ☰

reset

XE2RCS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2RCS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1744859698	0.45 Load	64.45 DegC	108 Mb	3 Pkt	9 Pkt
1744859399	0.49 Load	64.45 DegC	108 Mb	3 Pkt	8 Pkt
1744859098	0.42 Load	63.91 DegC	107 Mb	3 Pkt	8 Pkt
1744858799	0.35 Load	63.38 DegC	107 Mb	3 Pkt	8 Pkt
1744858498	0.38 Load	64.45 DegC	108 Mb	3 Pkt	9 Pkt
1744858199	0.32 Load	63.38 DegC	108 Mb	3 Pkt	8 Pkt
1744857898	0.34 Load	63.38 DegC	109 Mb	3 Pkt	8 Pkt
1744857598	0.34 Load	64.45 DegC	107 Mb	3 Pkt	8 Pkt
1744857298	0.41 Load	64.45 DegC	107 Mb	3 Pkt	9 Pkt
1744856999	0.5 Load	64.45 DegC	108 Mb	3 Pkt	8 Pkt
1744856698	0.5 Load	64.45 DegC	108 Mb	3 Pkt	8 Pkt
1744856398	0.41 Load	64.45 DegC	108 Mb	3 Pkt	8 Pkt
1744856098	0.39 Load	63.91 DegC	109 Mb	4 Pkt	9 Pkt
1744855798	0.29 Load	63.38 DegC	109 Mb	3 Pkt	8 Pkt
1744855499	0.32 Load	63.38 DegC	108 Mb	3 Pkt	8 Pkt
1744855198	0.33 Load	64.45 DegC	109 Mb	3 Pkt	8 Pkt
1744854899	0.4 Load	64.99 DegC	108 Mb	3 Pkt	8 Pkt
1744854598	0.45 Load	63.38 DegC	110 Mb	3 Pkt	8 Pkt
1744854299	0.47 Load	64.45 DegC	109 Mb	4 Pkt	8 Pkt
1744853998	0.43 Load	64.45 DegC	110 Mb	3 Pkt	8 Pkt
1744853699	0.35 Load	63.91 DegC	114 Mb	3 Pkt	9 Pkt
1744853398	0.35 Load	64.45 DegC	109 Mb	3 Pkt	8 Pkt
1744853099	0.35 Load	63.38 DegC	109 Mb	3 Pkt	8 Pkt
1744852798	0.41 Load	63.38 DegC	110 Mb	4 Pkt	8 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)