This is the latest recevied telemetry packets stored in our database for station/object DK9PS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744119010 | 24.3 deg C | 28.9 % | 0 | 0 | 0 |
| 1744118110 | 24.1 deg C | 29.8 % | 0 | 0 | 0 |
| 1744117210 | 23.9 deg C | 29.7 % | 0 | 0 | 0 |
| 1744116310 | 23.7 deg C | 30 % | 0 | 0 | 0 |
| 1744115410 | 23.5 deg C | 30.2 % | 0 | 0 | 0 |
| 1744114510 | 23.4 deg C | 30.5 % | 0 | 0 | 0 |
| 1744113610 | 23.2 deg C | 31.1 % | 0 | 0 | 0 |
| 1744112710 | 23.2 deg C | 31.5 % | 0 | 0 | 0 |
| 1744111810 | 23 deg C | 31.8 % | 0 | 0 | 0 |
| 1744110910 | 22.8 deg C | 32.3 % | 0 | 0 | 0 |
| 1744110010 | 22.6 deg C | 33.1 % | 0 | 0 | 0 |
| 1744109110 | 22.4 deg C | 33.7 % | 0 | 0 | 0 |
| 1744108779 | 22.4 deg C | 34 % | 0 | 0 | 0 |
| 1744107879 | 22.2 deg C | 34.9 % | 0 | 0 | 0 |
| 1744106977 | 22.1 deg C | 34.6 % | 0 | 0 | 0 |
| 1744106077 | 21.9 deg C | 35.4 % | 0 | 0 | 0 |
| 1744105177 | 21.7 deg C | 35.5 % | 0 | 0 | 0 |
| 1744104277 | 21.7 deg C | 34.6 % | 0 | 0 | 0 |
| 1744103377 | 21.4 deg C | 34.5 % | 0 | 0 | 0 |
| 1744102477 | 21.1 deg C | 34.7 % | 0 | 0 | 0 |
| 1744101576 | 20.8 deg C | 34.6 % | 0 | 0 | 0 |
| 1744100676 | 20.7 deg C | 35.5 % | 0 | 0 | 0 |
| 1744099776 | 20.4 deg C | 35.5 % | 0 | 0 | 0 |
| 1744098876 | 20.2 deg C | 35.7 % | 0 | 0 | 0 |
| 1744097976 | 20.2 deg C | 35.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)