APRS Track Direct

My position About ☰

reset

SP9MOA-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9MOA-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	T_in*	T_out*	Rx1h*	Dg1h*
1782489090	13.9 Volt	35 C	29.5 C	390 Pkt	30 Pkt
1782487890	13.9 Volt	35.5 C	30 C	390 Pkt	30 Pkt
1782487292	13.9 Volt	35.5 C	30 C	400 Pkt	30 Pkt
1782486690	13.9 Volt	35.5 C	30 C	410 Pkt	30 Pkt
1782486092	13.9 Volt	36 C	30 C	430 Pkt	40 Pkt
1782485490	13.9 Volt	36.5 C	29.5 C	430 Pkt	40 Pkt
1782484893	13.9 Volt	36.5 C	30 C	430 Pkt	50 Pkt
1782484290	13.9 Volt	37.5 C	30.5 C	410 Pkt	50 Pkt
1782483690	13.9 Volt	38 C	30.5 C	400 Pkt	40 Pkt
1782483093	13.9 Volt	37 C	30.5 C	380 Pkt	40 Pkt
1782482492	13.9 Volt	37.5 C	31 C	370 Pkt	30 Pkt
1782481890	13.9 Volt	38 C	31.5 C	380 Pkt	30 Pkt
1782481293	13.9 Volt	38.5 C	32 C	390 Pkt	20 Pkt
1782480690	13.9 Volt	39.5 C	32 C	410 Pkt	20 Pkt
1782480090	14 Volt	40.5 C	32 C	420 Pkt	20 Pkt
1782479491	13.9 Volt	40 C	31.5 C	410 Pkt	20 Pkt
1782478890	14 Volt	38.5 C	31.5 C	410 Pkt	20 Pkt
1782478292	14 Volt	38 C	31.5 C	380 Pkt	10 Pkt
1782477090	14 Volt	39 C	32.5 C	300 Pkt	10 Pkt
1782476490	14 Volt	39 C	32.5 C	300 Pkt	10 Pkt
1782475897	14 Volt	39.5 C	32.5 C	290 Pkt	10 Pkt
1782475293	14 Volt	39 C	32.5 C	280 Pkt	10 Pkt
1782474690	14 Volt	37 C	32 C	310 Pkt	10 Pkt
1782474093	14 Volt	37 C	31 C	330 Pkt	10 Pkt
1782473490	14 Volt	36.5 C	31 C	400 Pkt	10 Pkt

*Used Equation Coefficients:

Battery: 0, 0.1, 0

T_in: 0, 0.5, -64

T_out: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)