APRS Track Direct

My position About ☰

reset

KF5MIL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF5MIL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	V2*	RFiGate*	DigiRpt*	InetIn*
1778039037	12.4 V	50 Pkts	16 Pkts	13 Pkts
1778035437	12.4 V	88 Pkts	28 Pkts	44 Pkts
1778031837	12.4 V	17 Pkts	14 Pkts	11 Pkts
1778028237	12.5 V	25 Pkts	18 Pkts	12 Pkts
1778024637	12.6 V	26 Pkts	21 Pkts	12 Pkts
1778021037	12.9 V	47 Pkts	33 Pkts	15 Pkts
1778017437	12.9 V	27 Pkts	22 Pkts	12 Pkts
1778013837	12.8 V	23 Pkts	19 Pkts	12 Pkts
1778010237	12.9 V	35 Pkts	24 Pkts	12 Pkts
1778006637	12.9 V	37 Pkts	23 Pkts	12 Pkts
1778003037	12.6 V	44 Pkts	30 Pkts	12 Pkts
1777999437	12.8 V	52 Pkts	35 Pkts	11 Pkts
1777995837	12.6 V	32 Pkts	23 Pkts	12 Pkts
1777992237	12.5 V	32 Pkts	22 Pkts	131 Pkts
1777988637	12.5 V	52 Pkts	26 Pkts	33 Pkts
1777985037	12.5 V	72 Pkts	25 Pkts	27 Pkts
1777981438	12.6 V	427 Pkts	77 Pkts	95 Pkts
1777977837	12.6 V	575 Pkts	106 Pkts	99 Pkts
1777974237	12.6 V	401 Pkts	82 Pkts	95 Pkts
1777970637	12.7 V	134 Pkts	34 Pkts	78 Pkts
1777967037	12.8 V	69 Pkts	26 Pkts	30 Pkts
1777963437	12.8 V	33 Pkts	20 Pkts	12 Pkts
1777959837	12.8 V	22 Pkts	16 Pkts	12 Pkts
1777956237	12.9 V	25 Pkts	20 Pkts	12 Pkts

*Used Equation Coefficients:

V2: 0, 0.1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetIn: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)