APRS Track Direct

My position About ☰

reset

HS0ACS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS0ACS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1779789616	4 Pkt	0 Pkt	0 Pkt	-68 dBm	13.78 V
1779788692	2 Pkt	0 Pkt	0 Pkt	-69 dBm	13.78 V
1779787770	5 Pkt	0 Pkt	0 Pkt	-69 dBm	13.78 V
1779786846	0 Pkt	0 Pkt	0 Pkt	-68 dBm	13.8 V
1779785849	6 Pkt	0 Pkt	0 Pkt	-68 dBm	13.8 V
1779784925	4 Pkt	0 Pkt	0 Pkt	-69 dBm	13.8 V
1779784002	4 Pkt	0 Pkt	0 Pkt	-68 dBm	13.8 V
1779783079	-	-	-	-	-
1779783078	0 Pkt	0 Pkt	0 Pkt	-69 dBm	13.78 V
1779782080	3 Pkt	0 Pkt	0 Pkt	-68 dBm	13.74 V
1779781157	5 Pkt	0 Pkt	0 Pkt	-68 dBm	13.74 V
1779780233	4 Pkt	0 Pkt	0 Pkt	-69 dBm	13.72 V
1779779310	0 Pkt	0 Pkt	0 Pkt	-68 dBm	13.74 V
1779778443	3 Pkt	0 Pkt	0 Pkt	-67 dBm	13.72 V
1779777129	1 Pkt	0 Pkt	0 Pkt	-70 dBm	13.74 V
1779776133	9 Pkt	0 Pkt	0 Pkt	-69 dBm	13.74 V
1779775210	5 Pkt	1 Pkt	0 Pkt	-71 dBm	13.68 V
1779774287	5 Pkt	0 Pkt	0 Pkt	-71 dBm	13.74 V
1779773363	0 Pkt	0 Pkt	0 Pkt	-71 dBm	13.74 V
1779772364	4 Pkt	0 Pkt	0 Pkt	-69 dBm	13.72 V
1779771441	5 Pkt	1 Pkt	0 Pkt	-69 dBm	13.78 V
1779770518	9 Pkt	0 Pkt	0 Pkt	-71 dBm	13.74 V
1779769593	1 Pkt	0 Pkt	0 Pkt	-70 dBm	13.74 V
1779768594	10 Pkt	0 Pkt	1 Pkt	-71 dBm	13.72 V
1779767669	4 Pkt	0 Pkt	0 Pkt	-69 dBm	13.78 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)