This is the latest recevied telemetry packets stored in our database for station/object SP8JCF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1749329614 | 12.23 Volt | 130 Pkt | 40 Pkt | 93 Pcnt | 0 None |
1749329613 | 12.23 Volt | 130 Pkt | 40 Pkt | 93 Pcnt | 0 None |
1749329313 | 12.23 Volt | 130 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749329014 | 12.23 Volt | 130 Pkt | 40 Pkt | 92 Pcnt | 0 None |
1749329013 | 12.23 Volt | 130 Pkt | 40 Pkt | 92 Pcnt | 0 None |
1749328713 | 12.23 Volt | 130 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749328414 | 12.23 Volt | 130 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749328413 | 12.23 Volt | 130 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749328113 | 12.23 Volt | 130 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749327814 | 12.23 Volt | 120 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749327813 | 12.23 Volt | 120 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749327513 | 12.23 Volt | 120 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749327214 | 12.23 Volt | 120 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749327213 | 12.23 Volt | 120 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749326913 | 12.23 Volt | 120 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749326614 | 12.23 Volt | 120 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749326613 | 12.23 Volt | 120 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749326313 | 12.23 Volt | 120 Pkt | 40 Pkt | 91 Pcnt | 0 None |
1749326014 | 12.23 Volt | 120 Pkt | 40 Pkt | 89 Pcnt | 0 None |
1749326013 | 12.23 Volt | 120 Pkt | 40 Pkt | 89 Pcnt | 0 None |
1749325713 | 12.23 Volt | 120 Pkt | 40 Pkt | 89 Pcnt | 0 None |
1749325414 | 12.23 Volt | 110 Pkt | 30 Pkt | 88 Pcnt | 0 None |
1749325413 | 12.23 Volt | 110 Pkt | 30 Pkt | 88 Pcnt | 0 None |
1749325113 | 12.23 Volt | 110 Pkt | 40 Pkt | 90 Pcnt | 0 None |
1749324814 | 12.23 Volt | 120 Pkt | 30 Pkt | 91 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)