This is the latest recevied telemetry packets stored in our database for station/object YD0BCX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temperature* | Humidity* | Pressure* | Altitude* | Value5* |
---|---|---|---|---|---|
1719663071 | 37.29 deg.C | 52 % | 1011.24 Pa | 17 MSL | 0 |
1719662471 | 37.46 deg.C | 51.33 % | 1011.05 Pa | 18 MSL | 0 |
1719661870 | 37.7 deg.C | 50.48 % | 1010.67 Pa | 22 MSL | 0 |
1719661269 | 37.73 deg.C | 50.31 % | 1010.51 Pa | 23 MSL | 0 |
1719660669 | 37.71 deg.C | 49.99 % | 1010.43 Pa | 24 MSL | 0 |
1719659468 | 37.6 deg.C | 50.45 % | 1010.24 Pa | 25 MSL | 0 |
1719658868 | 37.59 deg.C | 51.03 % | 1010.02 Pa | 27 MSL | 0 |
1719658267 | 37.52 deg.C | 51.16 % | 1010.09 Pa | 27 MSL | 0 |
1719657667 | 37.83 deg.C | 50.43 % | 1009.92 Pa | 28 MSL | 0 |
1719657066 | 37.87 deg.C | 50.36 % | 1009.75 Pa | 29 MSL | 0 |
1719656466 | 37.63 deg.C | 50.84 % | 1009.49 Pa | 31 MSL | 0 |
1719655865 | 37.61 deg.C | 50.47 % | 1009.65 Pa | 30 MSL | 0 |
1719655264 | 37.71 deg.C | 49.66 % | 1009.66 Pa | 30 MSL | 0 |
1719654664 | 39.01 deg.C | 45.49 % | 1009.54 Pa | 31 MSL | 0 |
1719654063 | 38.26 deg.C | 48.76 % | 1009.2 Pa | 34 MSL | 0 |
1719653462 | 38.3 deg.C | 47.19 % | 1008.84 Pa | 37 MSL | 0 |
1719652861 | 38.31 deg.C | 46.74 % | 1008.99 Pa | 36 MSL | 0 |
1719652261 | 38.33 deg.C | 45.85 % | 1008.9 Pa | 36 MSL | 0 |
1719651661 | 38.34 deg.C | 45.75 % | 1008.97 Pa | 36 MSL | 0 |
1719651061 | 38.43 deg.C | 45.71 % | 1008.95 Pa | 36 MSL | 0 |
1719650460 | 38.57 deg.C | 46.01 % | 1008.58 Pa | 39 MSL | 0 |
1719649859 | 38.47 deg.C | 46.33 % | 1008.45 Pa | 40 MSL | 0 |
1719649259 | 38.32 deg.C | 46.68 % | 1008.71 Pa | 38 MSL | 0 |
1719648658 | 38.18 deg.C | 46.91 % | 1008.83 Pa | 37 MSL | 0 |
1719648058 | 38.31 deg.C | 46.6 % | 1008.6 Pa | 39 MSL | 0 |
*Used Equation Coefficients:
Temperature: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Altitude: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)