This is the latest recevied telemetry packets stored in our database for station/object VA3APW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Rx10m* |
|---|---|---|---|---|---|
| 1836274661 | 13.13 Volt | 460 Pkt | 0 Pkt | 63 Pcnt | 0 Pkt |
| 1836274511 | 13.13 Volt | 460 Pkt | 0 Pkt | 63 Pcnt | 0 Pkt |
| 1836274361 | 13.13 Volt | 470 Pkt | 0 Pkt | 63 Pcnt | 0 Pkt |
| 1836274210 | 13.13 Volt | 460 Pkt | 0 Pkt | 63 Pcnt | 0 Pkt |
| 1836274060 | 13.13 Volt | 480 Pkt | 0 Pkt | 62 Pcnt | 0 Pkt |
| 1762288652 | 13.13 Volt | 30 Pkt | 0 Pkt | 34 Pcnt | 0 Pkt |
| 1762288353 | 13.13 Volt | 40 Pkt | 0 Pkt | 36 Pcnt | 0 Pkt |
| 1762288052 | 13.13 Volt | 40 Pkt | 0 Pkt | 37 Pcnt | 0 Pkt |
| 1762287752 | 13.13 Volt | 40 Pkt | 0 Pkt | 40 Pcnt | 0 Pkt |
| 1762287453 | 13.13 Volt | 40 Pkt | 0 Pkt | 42 Pcnt | 0 Pkt |
| 1762287153 | 13.13 Volt | 50 Pkt | 0 Pkt | 38 Pcnt | 0 Pkt |
| 1762286853 | 13.13 Volt | 50 Pkt | 0 Pkt | 36 Pcnt | 0 Pkt |
| 1762286553 | 13.13 Volt | 50 Pkt | 0 Pkt | 36 Pcnt | 0 Pkt |
| 1762286253 | 13.13 Volt | 60 Pkt | 0 Pkt | 36 Pcnt | 0 Pkt |
| 1762285953 | 13.13 Volt | 60 Pkt | 0 Pkt | 37 Pcnt | 0 Pkt |
| 1762285653 | 13.13 Volt | 70 Pkt | 0 Pkt | 40 Pcnt | 0 Pkt |
| 1762285353 | 13.13 Volt | 70 Pkt | 0 Pkt | 40 Pcnt | 0 Pkt |
| 1762285053 | 13.13 Volt | 70 Pkt | 0 Pkt | 41 Pcnt | 0 Pkt |
| 1762284753 | 13.13 Volt | 80 Pkt | 0 Pkt | 44 Pcnt | 0 Pkt |
| 1762284453 | 13.13 Volt | 100 Pkt | 0 Pkt | 48 Pcnt | 0 Pkt |
| 1762284153 | 13.13 Volt | 130 Pkt | 0 Pkt | 52 Pcnt | 0 Pkt |
| 1762283853 | 13.13 Volt | 140 Pkt | 0 Pkt | 54 Pcnt | 0 Pkt |
| 1762283553 | 13.13 Volt | 150 Pkt | 0 Pkt | 59 Pcnt | 0 Pkt |
| 1762283253 | 13.13 Volt | 160 Pkt | 0 Pkt | 64 Pcnt | 0 Pkt |
| 1762282953 | 13.13 Volt | 160 Pkt | 0 Pkt | 66 Pcnt | 0 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10m: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)