APRS Track Direct

My position About ☰

reset

N4NE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N4NE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732292817	0.14 Rx Erlang	0.02 Tx Erlang	135 count/10m	0 count/10m	19 count/10m
1732291617	0.11 Rx Erlang	0.02 Tx Erlang	111 count/10m	0 count/10m	19 count/10m
1732290417	0.13 Rx Erlang	0.02 Tx Erlang	136 count/10m	0 count/10m	24 count/10m
1732289217	0.11 Rx Erlang	0.02 Tx Erlang	96 count/10m	4 count/10m	16 count/10m
1732288017	0.1 Rx Erlang	0.02 Tx Erlang	96 count/10m	0 count/10m	18 count/10m
1732286817	0.09 Rx Erlang	0.02 Tx Erlang	94 count/10m	0 count/10m	15 count/10m
1732285617	0.11 Rx Erlang	0.02 Tx Erlang	113 count/10m	0 count/10m	25 count/10m
1732284417	0.09 Rx Erlang	0.03 Tx Erlang	99 count/10m	6 count/10m	28 count/10m
1732283217	0.12 Rx Erlang	0.02 Tx Erlang	122 count/10m	0 count/10m	20 count/10m
1732282017	0.13 Rx Erlang	0.02 Tx Erlang	142 count/10m	0 count/10m	17 count/10m
1732280817	0.14 Rx Erlang	0.02 Tx Erlang	139 count/10m	0 count/10m	19 count/10m
1732279617	0.13 Rx Erlang	0.02 Tx Erlang	134 count/10m	0 count/10m	18 count/10m
1732278417	0.12 Rx Erlang	0.02 Tx Erlang	119 count/10m	1 count/10m	15 count/10m
1732277217	0.12 Rx Erlang	0.02 Tx Erlang	124 count/10m	0 count/10m	18 count/10m
1732276017	0.13 Rx Erlang	0.02 Tx Erlang	126 count/10m	0 count/10m	16 count/10m
1732274817	0.11 Rx Erlang	0.01 Tx Erlang	106 count/10m	0 count/10m	14 count/10m
1732273617	0.12 Rx Erlang	0.01 Tx Erlang	109 count/10m	0 count/10m	12 count/10m
1732272417	0.13 Rx Erlang	0.01 Tx Erlang	120 count/10m	0 count/10m	13 count/10m
1732271217	0.12 Rx Erlang	0.01 Tx Erlang	115 count/10m	0 count/10m	12 count/10m
1732270017	0.11 Rx Erlang	0.02 Tx Erlang	111 count/10m	0 count/10m	11 count/10m
1732268817	0.11 Rx Erlang	0.02 Tx Erlang	110 count/10m	0 count/10m	14 count/10m
1732267617	0.1 Rx Erlang	0.01 Tx Erlang	102 count/10m	0 count/10m	10 count/10m
1732266417	0.12 Rx Erlang	0.01 Tx Erlang	116 count/10m	0 count/10m	12 count/10m
1732265217	0.13 Rx Erlang	0.01 Tx Erlang	125 count/10m	0 count/10m	14 count/10m
1732264017	0.11 Rx Erlang	0.01 Tx Erlang	109 count/10m	0 count/10m	12 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)