APRS Track Direct

My position About ☰

reset

KK5CM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK5CM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Room*
1732309441	13.58 Volt	410 Pkt	130 Pkt	84 Pcnt	23.5 C
1732309436	13.58 Volt	410 Pkt	130 Pkt	84 Pcnt	23.5 C
1732309136	13.58 Volt	430 Pkt	130 Pkt	84 Pcnt	23 C
1732308843	13.58 Volt	420 Pkt	130 Pkt	84 Pcnt	22.5 C
1732308836	13.58 Volt	420 Pkt	130 Pkt	84 Pcnt	22.5 C
1732308536	13.58 Volt	440 Pkt	130 Pkt	84 Pcnt	22.5 C
1732308238	13.58 Volt	430 Pkt	130 Pkt	83 Pcnt	21.5 C
1732308236	13.58 Volt	430 Pkt	130 Pkt	83 Pcnt	21.5 C
1732307936	13.58 Volt	420 Pkt	140 Pkt	82 Pcnt	21.5 C
1732307637	13.58 Volt	430 Pkt	140 Pkt	81 Pcnt	23.5 C
1732307636	13.58 Volt	430 Pkt	140 Pkt	81 Pcnt	23.5 C
1732307336	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	23.5 C
1732307037	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	23.5 C
1732307036	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	23.5 C
1732306736	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	23 C
1732306437	13.58 Volt	420 Pkt	140 Pkt	81 Pcnt	22.5 C
1732306436	13.58 Volt	420 Pkt	140 Pkt	81 Pcnt	22.5 C
1732306136	13.58 Volt	430 Pkt	140 Pkt	81 Pcnt	22.5 C
1732305837	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	21.5 C
1732305836	13.58 Volt	430 Pkt	140 Pkt	82 Pcnt	21.5 C
1732305536	13.58 Volt	420 Pkt	140 Pkt	81 Pcnt	21.5 C
1732305246	13.58 Volt	400 Pkt	130 Pkt	81 Pcnt	23.5 C
1732305236	13.58 Volt	400 Pkt	130 Pkt	81 Pcnt	23.5 C
1732304936	13.58 Volt	400 Pkt	120 Pkt	80 Pcnt	23.5 C
1732304637	13.58 Volt	380 Pkt	120 Pkt	79 Pcnt	23.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Room: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)