APRS Track Direct

My position About ☰

reset

ZL1AOR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ZL1AOR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732275684	12.9 Volt	350 Pkt	90 Pkt	80 Pcnt
1732275081	12.9 Volt	340 Pkt	90 Pkt	79 Pcnt
1732274488	12.9 Volt	290 Pkt	80 Pkt	76 Pcnt
1732273880	12.9 Volt	280 Pkt	80 Pkt	73 Pcnt
1732273282	12.9 Volt	300 Pkt	90 Pkt	75 Pcnt
1732272680	12.9 Volt	280 Pkt	80 Pkt	74 Pcnt
1732272081	12.9 Volt	280 Pkt	80 Pkt	72 Pcnt
1732271477	12.9 Volt	280 Pkt	80 Pkt	72 Pcnt
1732270878	12.9 Volt	280 Pkt	80 Pkt	73 Pcnt
1732270281	12.9 Volt	290 Pkt	80 Pkt	75 Pcnt
1732269675	12.9 Volt	290 Pkt	80 Pkt	73 Pcnt
1732269076	12.9 Volt	290 Pkt	90 Pkt	71 Pcnt
1732268474	12.9 Volt	310 Pkt	100 Pkt	74 Pcnt
1732267876	12.9 Volt	340 Pkt	110 Pkt	73 Pcnt
1732267278	12.9 Volt	350 Pkt	100 Pkt	71 Pcnt
1732266683	12.9 Volt	350 Pkt	110 Pkt	72 Pcnt
1732266072	12.98 Volt	350 Pkt	110 Pkt	74 Pcnt
1732265487	12.9 Volt	370 Pkt	120 Pkt	73 Pcnt
1732264871	12.98 Volt	410 Pkt	130 Pkt	73 Pcnt
1732264270	12.98 Volt	420 Pkt	140 Pkt	73 Pcnt
1732263678	12.98 Volt	400 Pkt	140 Pkt	75 Pcnt
1732263083	12.98 Volt	410 Pkt	140 Pkt	74 Pcnt
1732262469	12.98 Volt	410 Pkt	140 Pkt	75 Pcnt
1732261874	12.98 Volt	380 Pkt	120 Pkt	75 Pcnt
1732261270	12.98 Volt	350 Pkt	110 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, -0.3

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)