This is the latest recevied telemetry packets stored in our database for station/object WA4OPQ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BattCur* | BtVolt* | Power* | SolR* | BoxT* |
|---|---|---|---|---|---|
| 1731604603 | 78 mAmp | 11.95 Volt | 0 Watt | 0 W/m2 | 75.2 deg.F |
| 1731603752 | -333.6 mAmp | 11.83 Volt | 4.08 Watt | 0 W/m2 | 75.2 deg.F |
| 1731602942 | -274.8 mAmp | 11.89 Volt | 2.2 Watt | 0 W/m2 | 75.2 deg.F |
| 1731602097 | -255.2 mAmp | 11.86 Volt | 2.83 Watt | 0 W/m2 | 75.2 deg.F |
| 1731601277 | -255.2 mAmp | 11.9 Volt | 3.45 Watt | 0 W/m2 | 75.2 deg.F |
| 1731600454 | -137.6 mAmp | 12.01 Volt | 2.83 Watt | 0 W/m2 | 75.2 deg.F |
| 1731599698 | 646.4 mAmp | 12.32 Volt | 8.79 Watt | 0 W/m2 | 75.2 deg.F |
| 1731598228 | 195.6 mAmp | 12.21 Volt | 2.83 Watt | 0 W/m2 | 75.2 deg.F |
| 1731597469 | -39.6 mAmp | 12.12 Volt | 0 Watt | 0 W/m2 | 75.2 deg.F |
| 1731595927 | 372 mAmp | 12.08 Volt | 5.02 Watt | 0 W/m2 | 75.2 deg.F |
*Used Equation Coefficients:
BattCur: 0, 19.6, -1000
BtVolt: 0, 0.012, 11
Power: 0, 0.314, 0
SolR: 0, 3.92, 0
BoxT: 0, 0.47, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)