APRS Track Direct

My position About ☰

reset

N5UMJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5UMJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732290920	14.22 Volt	240 Pkt	40 Pkt	65 Pcnt
1732290619	14.22 Volt	220 Pkt	40 Pkt	64 Pcnt
1732290319	14.14 Volt	210 Pkt	40 Pkt	64 Pcnt
1732290019	14.22 Volt	200 Pkt	40 Pkt	65 Pcnt
1732289719	14.22 Volt	200 Pkt	40 Pkt	66 Pcnt
1732289418	14.22 Volt	190 Pkt	40 Pkt	65 Pcnt
1732289118	14.22 Volt	190 Pkt	40 Pkt	64 Pcnt
1732288819	14.22 Volt	170 Pkt	30 Pkt	62 Pcnt
1732288517	14.22 Volt	160 Pkt	40 Pkt	61 Pcnt
1732288217	14.22 Volt	140 Pkt	40 Pkt	58 Pcnt
1732287918	14.22 Volt	130 Pkt	40 Pkt	56 Pcnt
1732287616	14.22 Volt	120 Pkt	40 Pkt	57 Pcnt
1732287316	14.06 Volt	120 Pkt	30 Pkt	56 Pcnt
1732287016	14.22 Volt	120 Pkt	30 Pkt	58 Pcnt
1732286716	14.06 Volt	120 Pkt	30 Pkt	55 Pcnt
1732286415	14.22 Volt	120 Pkt	30 Pkt	54 Pcnt
1732286115	14.22 Volt	110 Pkt	30 Pkt	52 Pcnt
1732285815	14.22 Volt	110 Pkt	30 Pkt	52 Pcnt
1732285515	14.06 Volt	110 Pkt	30 Pkt	52 Pcnt
1732285214	14.06 Volt	120 Pkt	40 Pkt	48 Pcnt
1732284914	14.06 Volt	110 Pkt	30 Pkt	46 Pcnt
1732284614	14.22 Volt	120 Pkt	40 Pkt	48 Pcnt
1732284313	14.06 Volt	120 Pkt	40 Pkt	47 Pcnt
1732284013	14.22 Volt	140 Pkt	40 Pkt	47 Pcnt
1732283713	14.06 Volt	150 Pkt	40 Pkt	50 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)