This is the latest recevied telemetry packets stored in our database for station/object K1FFK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1718713723 | 14.03 Volt | 900 Pkt | 250 Pkt | 55 Pcnt | 0 None |
1718711928 | 14.03 Volt | 940 Pkt | 280 Pkt | 56 Pcnt | 0 None |
1718710120 | 14.03 Volt | 940 Pkt | 290 Pkt | 57 Pcnt | 0 None |
1718708318 | 14.03 Volt | 910 Pkt | 270 Pkt | 59 Pcnt | 0 None |
1718706516 | 14.03 Volt | 860 Pkt | 280 Pkt | 59 Pcnt | 0 None |
1718704721 | 14.03 Volt | 820 Pkt | 290 Pkt | 56 Pcnt | 0 None |
1718702913 | 14.03 Volt | 830 Pkt | 290 Pkt | 58 Pcnt | 0 None |
1718701112 | 14.03 Volt | 830 Pkt | 280 Pkt | 61 Pcnt | 0 None |
1718699310 | 14.03 Volt | 820 Pkt | 280 Pkt | 59 Pcnt | 0 None |
1718697510 | 14.03 Volt | 850 Pkt | 270 Pkt | 57 Pcnt | 0 None |
1718695708 | 14.03 Volt | 850 Pkt | 280 Pkt | 57 Pcnt | 0 None |
1718693905 | 14.03 Volt | 850 Pkt | 280 Pkt | 58 Pcnt | 0 None |
1718692103 | 14.03 Volt | 870 Pkt | 290 Pkt | 59 Pcnt | 0 None |
1718690301 | 14.03 Volt | 880 Pkt | 290 Pkt | 58 Pcnt | 0 None |
1718688499 | 14.03 Volt | 880 Pkt | 310 Pkt | 55 Pcnt | 0 None |
1718686697 | 14.03 Volt | 840 Pkt | 290 Pkt | 52 Pcnt | 0 None |
1718684897 | 14.03 Volt | 870 Pkt | 270 Pkt | 51 Pcnt | 0 None |
1718683094 | 14.03 Volt | 910 Pkt | 300 Pkt | 53 Pcnt | 0 None |
1718681293 | 14.03 Volt | 880 Pkt | 310 Pkt | 56 Pcnt | 0 None |
1718679491 | 14.03 Volt | 880 Pkt | 300 Pkt | 59 Pcnt | 0 None |
1718677690 | 14.03 Volt | 850 Pkt | 270 Pkt | 57 Pcnt | 0 None |
1718675887 | 14.03 Volt | 770 Pkt | 230 Pkt | 55 Pcnt | 0 None |
1718674085 | 14.03 Volt | 790 Pkt | 260 Pkt | 58 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)