APRS Track Direct

My position About ☰

reset

VK2HFJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HFJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Supply*	Current*	Power*	Core*
1774396989	13.92 VDC	195 mA	2665 mW	62.3 deg.C
1774393401	13.98 VDC	187 mA	2945 mW	47.7 deg.C
1774393400	13.99 VDC	181 mA	2900 mW	47.2 deg.C
1774393398	13.93 VDC	207 mA	2437 mW	47.2 deg.C
1774393354	13.94 VDC	178 mA	2690 mW	45.7 deg.C
1774388888	13.71 VDC	212 mA	2803 mW	37.9 deg.C
1774388735	13.38 VDC	263 mA	3490 mW	32.1 deg.C
1774388733	13.73 VDC	275 mA	3589 mW	31.6 deg.C
1774388731	13.6 VDC	227 mA	2991 mW	31.6 deg.C
1774388729	13.68 VDC	221 mA	3190 mW	32.6 deg.C
1774388727	13.76 VDC	247 mA	3223 mW	32.6 deg.C
1774388725	13.68 VDC	235 mA	3084 mW	32.1 deg.C
1774388724	13.72 VDC	256 mA	3361 mW	31.1 deg.C
1774388722	13.65 VDC	257 mA	3386 mW	30.6 deg.C
1774388719	13.69 VDC	252 mA	3415 mW	30.6 deg.C

*Used Equation Coefficients:

Supply: 0, 1, 0

Current: 0, 1, 0

Power: 0, 1, 0

Core: 0, 0.1, 0

Spare: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)