APRS Track Direct

My position About ☰

reset

EA5AKC-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5AKC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774119860	2 Pkt	4 Pkt	0 Pkt	-49 dBm	13.56 V
1774118937	2 Pkt	5 Pkt	0 Pkt	-46 dBm	13.58 V
1774118015	0 Pkt	4 Pkt	0 Pkt	-44 dBm	13.58 V
1774117093	4 Pkt	6 Pkt	2 Pkt	-44 dBm	13.56 V
1774116170	8 Pkt	2 Pkt	2 Pkt	-44 dBm	13.56 V
1774115247	8 Pkt	6 Pkt	9 Pkt	-43 dBm	13.56 V
1774114324	10 Pkt	3 Pkt	9 Pkt	-41 dBm	13.56 V
1774113401	10 Pkt	5 Pkt	4 Pkt	-48 dBm	13.56 V
1774112478	8 Pkt	3 Pkt	4 Pkt	-48 dBm	13.56 V
1774111555	12 Pkt	6 Pkt	7 Pkt	-43 dBm	13.58 V
1774110632	12 Pkt	3 Pkt	5 Pkt	-39 dBm	13.54 V
1774109709	9 Pkt	6 Pkt	6 Pkt	-38 dBm	13.56 V
1774108786	14 Pkt	3 Pkt	4 Pkt	-41 dBm	13.56 V
1774107863	12 Pkt	5 Pkt	9 Pkt	-42 dBm	13.56 V
1774106940	12 Pkt	3 Pkt	6 Pkt	-41 dBm	13.58 V
1774106017	8 Pkt	6 Pkt	4 Pkt	-42 dBm	13.56 V
1774105094	12 Pkt	3 Pkt	6 Pkt	-42 dBm	13.56 V
1774104171	12 Pkt	6 Pkt	8 Pkt	-41 dBm	13.56 V
1774103249	17 Pkt	3 Pkt	6 Pkt	-41 dBm	13.56 V
1774102325	10 Pkt	6 Pkt	8 Pkt	-41 dBm	13.58 V
1774101402	13 Pkt	3 Pkt	7 Pkt	-41 dBm	13.56 V
1774100479	9 Pkt	6 Pkt	7 Pkt	-41 dBm	13.56 V
1774099557	8 Pkt	3 Pkt	4 Pkt	-36 dBm	13.56 V
1774098634	9 Pkt	6 Pkt	7 Pkt	-36 dBm	13.56 V
1774097712	16 Pkt	4 Pkt	4 Pkt	-37 dBm	13.58 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)