APRS Track Direct

My position About ☰

reset

E22KKC-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1782560355	17 Pkt	0 Pkt	0 Pkt	-53 dBm	0.02 V
1782558530	18 Pkt	0 Pkt	4 Pkt	-52 dBm	0.02 V
1782556705	18 Pkt	0 Pkt	11 Pkt	-53 dBm	0.02 V
1782554880	12 Pkt	0 Pkt	7 Pkt	-52 dBm	0.02 V
1782553054	14 Pkt	0 Pkt	5 Pkt	-53 dBm	0.02 V
1782549476	1 Pkt	0 Pkt	0 Pkt	-54 dBm	0.02 V
1782547557	18 Pkt	0 Pkt	5 Pkt	-54 dBm	0.02 V
1782545731	7 Pkt	0 Pkt	6 Pkt	-54 dBm	0.02 V
1782543906	6 Pkt	1 Pkt	0 Pkt	-54 dBm	0.02 V
1782542081	3 Pkt	0 Pkt	0 Pkt	-53 dBm	0.02 V
1782540255	3 Pkt	0 Pkt	1 Pkt	-54 dBm	0.02 V
1782538430	6 Pkt	0 Pkt	0 Pkt	-55 dBm	0.02 V
1782536605	2 Pkt	0 Pkt	1 Pkt	-52 dBm	0.02 V
1782534780	19 Pkt	0 Pkt	2 Pkt	-54 dBm	0.02 V
1782532955	36 Pkt	0 Pkt	1 Pkt	-54 dBm	0.02 V
1782531129	23 Pkt	0 Pkt	2 Pkt	-56 dBm	0.02 V
1782529303	19 Pkt	0 Pkt	3 Pkt	-56 dBm	0.02 V
1782527478	11 Pkt	0 Pkt	5 Pkt	-54 dBm	0.02 V
1782525652	15 Pkt	0 Pkt	0 Pkt	-59 dBm	0.02 V
1782523827	35 Pkt	1 Pkt	12 Pkt	-58 dBm	0.02 V
1782522001	54 Pkt	0 Pkt	11 Pkt	-59 dBm	0.02 V
1782520175	56 Pkt	0 Pkt	12 Pkt	-59 dBm	0.02 V
1782518349	66 Pkt	0 Pkt	2 Pkt	-57 dBm	0.02 V
1782516523	2 Pkt	0 Pkt	0 Pkt	-55 dBm	0.02 V
1782514713	50 Pkt	0 Pkt	0 Pkt	-58 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)