This is the latest recevied telemetry packets stored in our database for station/object DL9AM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744225407 | 24.4 deg C | 23.9 % | 1021.5 hPa | 0 | 0 |
| 1744224504 | 24.4 deg C | 23.9 % | 1021.4 hPa | 0 | 0 |
| 1744223600 | 24.4 deg C | 23.8 % | 1021.3 hPa | 0 | 0 |
| 1744222704 | 24.5 deg C | 23.8 % | 1021.1 hPa | 0 | 0 |
| 1744221809 | 24.4 deg C | 23.8 % | 1021 hPa | 0 | 0 |
| 1744220910 | 24.4 deg C | 23.8 % | 1020.9 hPa | 0 | 0 |
| 1744220005 | 24.5 deg C | 23.7 % | 1021 hPa | 0 | 0 |
| 1744219103 | 24.5 deg C | 23.8 % | 1020.9 hPa | 0 | 0 |
| 1744218203 | 24.6 deg C | 23.6 % | 1020.2 hPa | 0 | 0 |
| 1744217307 | 24.6 deg C | 23.7 % | 1018.7 hPa | 0 | 0 |
| 1744216404 | 24.7 deg C | 23.6 % | 1018.7 hPa | 0 | 0 |
| 1744215508 | 24.8 deg C | 23.6 % | 1018.8 hPa | 0 | 0 |
| 1744214609 | 24.8 deg C | 23.5 % | 1018.6 hPa | 0 | 0 |
| 1744213711 | 24.8 deg C | 23.5 % | 1018.7 hPa | 0 | 0 |
| 1744212805 | 24.8 deg C | 23.6 % | 1018.5 hPa | 0 | 0 |
| 1744211903 | 24.9 deg C | 23.5 % | 1018.4 hPa | 0 | 0 |
| 1744211000 | 24.9 deg C | 23.4 % | 1020.1 hPa | 0 | 0 |
| 1744210105 | 24.9 deg C | 23.5 % | 1020.1 hPa | 0 | 0 |
| 1744209205 | 24.7 deg C | 23.6 % | 1019.9 hPa | 0 | 0 |
| 1744208310 | 24.6 deg C | 23.5 % | 1019.8 hPa | 0 | 0 |
| 1744207412 | 24.6 deg C | 23.4 % | 1019.6 hPa | 0 | 0 |
| 1744206509 | 24.7 deg C | 23 % | 1019.6 hPa | 0 | 0 |
| 1744205608 | 24.8 deg C | 22.9 % | 1019.9 hPa | 0 | 0 |
| 1744204704 | 24.8 deg C | 22.9 % | 1020 hPa | 0 | 0 |
| 1744203804 | 24.7 deg C | 22.9 % | 1019.8 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)