This is the latest recevied telemetry packets stored in our database for station/object DC1MPP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719426699 | 23.3 deg C | 65 % | 1009.9 hPa | 0 | 0 |
1719425800 | 23.3 deg C | 65.2 % | 1009.8 hPa | 0 | 0 |
1719424003 | 24 deg C | 64.4 % | 1009.5 hPa | 0 | 0 |
1719423106 | 24.1 deg C | 66.5 % | 1009.4 hPa | 0 | 0 |
1719422203 | 24 deg C | 67.1 % | 1009 hPa | 0 | 0 |
1719420412 | 24.3 deg C | 67.5 % | 1008.7 hPa | 0 | 0 |
1719419513 | 24.3 deg C | 66.7 % | 1009.3 hPa | 0 | 0 |
1719418611 | 24.6 deg C | 63.1 % | 1009.8 hPa | 0 | 0 |
1719417711 | 24.7 deg C | 61.4 % | 1010 hPa | 0 | 0 |
1719416803 | 24.8 deg C | 61 % | 1009.4 hPa | 0 | 0 |
1719415901 | 24.8 deg C | 59.9 % | 1009.3 hPa | 0 | 0 |
1719414996 | 24.9 deg C | 59.5 % | 1008.7 hPa | 0 | 0 |
1719414091 | 24.9 deg C | 59.6 % | 1008.7 hPa | 0 | 0 |
1719413186 | 25.1 deg C | 57.6 % | 1009.1 hPa | 0 | 0 |
1719412289 | 25.1 deg C | 56.7 % | 1008.8 hPa | 0 | 0 |
1719411385 | 25.2 deg C | 56 % | 1008 hPa | 0 | 0 |
1719410481 | 25.4 deg C | 56 % | 1007.9 hPa | 0 | 0 |
1719409582 | 25.2 deg C | 56.3 % | 1008 hPa | 0 | 0 |
1719408680 | 25 deg C | 56.2 % | 1008.1 hPa | 0 | 0 |
1719407779 | 25 deg C | 56.3 % | 1008.2 hPa | 0 | 0 |
1719406883 | 24.9 deg C | 56.4 % | 1008.4 hPa | 0 | 0 |
1719405980 | 24.9 deg C | 56.3 % | 1008.4 hPa | 0 | 0 |
1719405075 | 24.8 deg C | 56.7 % | 1008.5 hPa | 0 | 0 |
1719404174 | 24.9 deg C | 56.6 % | 1008.7 hPa | 0 | 0 |
1719403274 | 24.8 deg C | 56.6 % | 1009.1 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)