This is the latest recevied telemetry packets stored in our database for station/object IK4HPS-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1773512461 | 1003.2 hPa | 18.6 C deg | 0 % | 1003.7 hPa | 0 C deg |
| 1773508824 | 1003.6 hPa | 18.5 C deg | 0 % | 1004.1 hPa | 0 C deg |
| 1773507003 | 1003.6 hPa | 18.5 C deg | 0 % | 1004.1 hPa | 0 C deg |
| 1773505193 | 1003.7 hPa | 18.4 C deg | 0 % | 1004.1 hPa | 0 C deg |
| 1773503372 | 1003.8 hPa | 18.5 C deg | 0 % | 1004.3 hPa | 0 C deg |
| 1773499760 | 1003.8 hPa | 18.4 C deg | 0 % | 1004.3 hPa | 0 C deg |
| 1773496112 | 1004.8 hPa | 18.4 C deg | 0 % | 1005.3 hPa | 0 C deg |
| 1773492482 | 1005.5 hPa | 18.4 C deg | 0 % | 1006 hPa | 0 C deg |
| 1773485226 | 1007.6 hPa | 18.3 C deg | 0 % | 1008.1 hPa | 0 C deg |
| 1773483406 | 1007.9 hPa | 18.4 C deg | 0 % | 1008.4 hPa | 0 C deg |
| 1773481591 | 1008.5 hPa | 18.2 C deg | 0 % | 1008.9 hPa | 0 C deg |
| 1773479778 | 1008.9 hPa | 18.3 C deg | 0 % | 1009.4 hPa | 0 C deg |
| 1773477961 | 1009.3 hPa | 18.4 C deg | 0 % | 1009.8 hPa | 0 C deg |
| 1773476146 | 1009.5 hPa | 18 C deg | 0 % | 1010 hPa | 0 C deg |
| 1773474330 | 1009.8 hPa | 17.8 C deg | 0 % | 1010.2 hPa | 0 C deg |
| 1773472515 | 1010 hPa | 17.8 C deg | 0 % | 1010.4 hPa | 0 C deg |
| 1773470704 | 1009.9 hPa | 17.8 C deg | 0 % | 1010.4 hPa | 0 C deg |
| 1773470396 | 1009.9 hPa | 17.7 C deg | 0 % | 1010.3 hPa | 0 C deg |
| 1773427942 | 1016.8 hPa | 18.9 C deg | 0 % | 1017.2 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)