APRS Track Direct

My position About ☰

reset

TA4ALA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4ALA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774100618	36 Pkt	2 Pkt	1 Pkt	-20 dBm	14.05 V
1774099689	38 Pkt	0 Pkt	0 Pkt	-22 dBm	13.97 V
1774098761	21 Pkt	0 Pkt	0 Pkt	-20 dBm	13.99 V
1774097834	32 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774096906	24 Pkt	0 Pkt	0 Pkt	-23 dBm	14.03 V
1774095980	30 Pkt	0 Pkt	0 Pkt	-21 dBm	13.95 V
1774095053	30 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774094126	28 Pkt	0 Pkt	0 Pkt	-24 dBm	14.05 V
1774092273	34 Pkt	0 Pkt	0 Pkt	-20 dBm	14.05 V
1774091346	20 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774090419	39 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774089493	26 Pkt	0 Pkt	0 Pkt	-24 dBm	14.03 V
1774088566	30 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774087639	33 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774086712	30 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774085785	29 Pkt	0 Pkt	0 Pkt	-20 dBm	13.97 V
1774084859	19 Pkt	0 Pkt	0 Pkt	-22 dBm	14.03 V
1774083930	42 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774083003	27 Pkt	0 Pkt	0 Pkt	-19 dBm	13.95 V
1774082075	27 Pkt	0 Pkt	0 Pkt	-20 dBm	13.97 V
1774081147	27 Pkt	0 Pkt	0 Pkt	-21 dBm	14.03 V
1774080220	33 Pkt	0 Pkt	0 Pkt	-21 dBm	14.03 V
1774079291	38 Pkt	0 Pkt	0 Pkt	-19 dBm	14.03 V
1774077437	29 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V
1774076510	31 Pkt	0 Pkt	0 Pkt	-20 dBm	14.03 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)