APRS Track Direct

My position About ☰

reset

N5GAN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5GAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773480324	172 Pkts	158 Pkts	38 Pkts	12 C
1773478524	130 Pkts	121 Pkts	40 Pkts	12 C
1773476724	153 Pkts	142 Pkts	40 Pkts	12 C
1773474924	182 Pkts	172 Pkts	46 Pkts	12 C
1773473124	181 Pkts	163 Pkts	59 Pkts	12 C
1773471324	156 Pkts	137 Pkts	46 Pkts	14 C
1773469524	133 Pkts	123 Pkts	43 Pkts	13 C
1773467724	158 Pkts	141 Pkts	52 Pkts	14 C
1773465924	154 Pkts	134 Pkts	49 Pkts	14 C
1773464124	141 Pkts	124 Pkts	41 Pkts	14 C
1773462324	85 Pkts	75 Pkts	33 Pkts	15 C
1773460524	88 Pkts	78 Pkts	27 Pkts	16 C
1773458724	87 Pkts	81 Pkts	23 Pkts	17 C
1773456924	106 Pkts	100 Pkts	34 Pkts	17 C
1773455124	94 Pkts	90 Pkts	37 Pkts	17 C
1773453324	91 Pkts	84 Pkts	24 Pkts	17 C
1773451524	97 Pkts	91 Pkts	24 Pkts	18 C
1773449724	76 Pkts	74 Pkts	29 Pkts	17 C
1773447924	67 Pkts	61 Pkts	30 Pkts	17 C
1773446124	72 Pkts	67 Pkts	34 Pkts	18 C
1773444324	119 Pkts	115 Pkts	51 Pkts	18 C
1773442524	99 Pkts	94 Pkts	44 Pkts	19 C
1773440724	61 Pkts	54 Pkts	28 Pkts	22 C
1773438924	71 Pkts	66 Pkts	32 Pkts	23 C
1773437124	58 Pkts	53 Pkts	28 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)