APRS Track Direct

My position About ☰

reset

LU2EP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2EP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1786750048	45 Pkt	5 Pkt	31 dBm	12.63 V
1786748153	19 Pkt	0 Pkt	31 dBm	12.63 V
1786747076	25 Pkt	4 Pkt	31 dBm	12.63 V
1786745187	34 Pkt	1 Pkt	31 dBm	12.63 V
1786744100	34 Pkt	5 Pkt	31 dBm	12.63 V
1786742208	23 Pkt	3 Pkt	31 dBm	12.63 V
1786741126	20 Pkt	2 Pkt	31 dBm	12.63 V
1786739243	7 Pkt	3 Pkt	31 dBm	12.63 V
1786738166	26 Pkt	1 Pkt	31 dBm	12.65 V
1786736283	22 Pkt	7 Pkt	31 dBm	12.63 V
1786735204	17 Pkt	2 Pkt	31 dBm	12.63 V
1786733318	35 Pkt	7 Pkt	31 dBm	12.65 V
1786732238	10 Pkt	1 Pkt	31 dBm	12.63 V
1786730357	13 Pkt	0 Pkt	31 dBm	12.63 V
1786729279	26 Pkt	0 Pkt	31 dBm	12.65 V
1786727396	13 Pkt	1 Pkt	31 dBm	12.63 V
1786726318	12 Pkt	2 Pkt	31 dBm	12.65 V
1786724436	13 Pkt	3 Pkt	31 dBm	12.65 V
1786723357	16 Pkt	0 Pkt	31 dBm	12.65 V
1786721475	14 Pkt	1 Pkt	31 dBm	12.67 V
1786720397	35 Pkt	1 Pkt	31 dBm	12.65 V
1786718511	15 Pkt	0 Pkt	31 dBm	12.65 V
1786717432	13 Pkt	6 Pkt	31 dBm	12.65 V
1786715552	80 Pkt	4 Pkt	31 dBm	12.65 V
1786714453	21 Pkt	4 Pkt	31 dBm	12.65 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)