APRS Track Direct

My position About ☰

reset

DH8TOM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH8TOM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX10m*	RX1h*	Eff1h*	Temp*
1732293320	25 Pkt	400 Pkt	100 Pcnt	17.28 Grad
1732293020	25 Pkt	490 Pkt	99 Pcnt	17.28 Grad
1732292720	23 Pkt	480 Pkt	99 Pcnt	17.28 Grad
1732292420	23 Pkt	450 Pkt	100 Pcnt	17.28 Grad
1732292119	23 Pkt	400 Pkt	99 Pcnt	17.28 Grad
1732291819	23 Pkt	400 Pkt	99 Pcnt	17.28 Grad
1732291519	23 Pkt	430 Pkt	99 Pcnt	17.28 Grad
1732291218	22 Pkt	460 Pkt	99 Pcnt	17.28 Grad
1732290918	22 Pkt	340 Pkt	99 Pcnt	17.28 Grad
1732290618	21 Pkt	310 Pkt	99 Pcnt	17.28 Grad
1732290317	22 Pkt	500 Pkt	99 Pcnt	17.28 Grad
1732290017	21 Pkt	380 Pkt	99 Pcnt	17.28 Grad
1732289717	20 Pkt	220 Pkt	99 Pcnt	17.28 Grad
1732289417	21 Pkt	320 Pkt	100 Pcnt	17.28 Grad
1732289116	19 Pkt	390 Pkt	96 Pcnt	17.28 Grad
1732288816	18 Pkt	440 Pkt	89 Pcnt	17.28 Grad
1732288516	16 Pkt	430 Pkt	82 Pcnt	17.28 Grad
1732288237	15 Pkt	310 Pkt	81 Pcnt	17.28 Grad
1732287915	14 Pkt	340 Pkt	81 Pcnt	17.28 Grad
1732287615	14 Pkt	400 Pkt	80 Pcnt	17.28 Grad
1732287315	15 Pkt	350 Pkt	82 Pcnt	17.28 Grad
1732287014	15 Pkt	310 Pkt	82 Pcnt	17.28 Grad
1732286714	15 Pkt	340 Pkt	81 Pcnt	17.28 Grad
1732286414	15 Pkt	320 Pkt	82 Pcnt	17.28 Grad
1732286113	17 Pkt	130 Pkt	83 Pcnt	17.28 Grad

*Used Equation Coefficients:

RX10m: 0, 1, 0

RX1h: 0, 10, 0

Eff1h: 0, 1, 0

Vin: 0, 0.101, 0

Temp: 0, 0.135, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)