This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1744871110 | 4 V | 0 V | 420 mW | 32.4 degC | 99912.5 Pa |
| 1744871091 | 4 V | 0 V | 322 mW | 32.3 degC | 99925 Pa |
| 1744871066 | 4.01 V | 0 V | 338 mW | 31.8 degC | 99925 Pa |
| 1744870972 | 4 V | 0 V | 296 mW | 31.5 degC | 99925 Pa |
| 1744870905 | 4 V | 0 V | 278 mW | 31.6 degC | 99925 Pa |
| 1744870831 | 4 V | 0 V | 320 mW | 32.5 degC | 99912.5 Pa |
| 1744870786 | 4 V | 0 V | 418 mW | 32.7 degC | 99912.5 Pa |
| 1744870778 | 4 V | 0 V | 344 mW | 32.5 degC | 99912.5 Pa |
| 1744870732 | 4 V | 0 V | 362 mW | 32.3 degC | 99912.5 Pa |
| 1744870638 | 4 V | 0 V | 354 mW | 32.1 degC | 99912.5 Pa |
| 1744870558 | 4 V | 0 V | 332 mW | 31.5 degC | 99912.5 Pa |
| 1744870504 | 4 V | 0 V | 300 mW | 31.8 degC | 99937.5 Pa |
| 1744870432 | 4 V | 0 V | 304 mW | 31.6 degC | 99925 Pa |
| 1744870373 | 4 V | 0 V | 366 mW | 32.4 degC | 99912.5 Pa |
| 1744870364 | 4 V | 0 V | 312 mW | 32.3 degC | 99912.5 Pa |
| 1744870284 | 3.99 V | 0 V | 426 mW | 32 degC | 99912.5 Pa |
| 1744870241 | 4 V | 0 V | 298 mW | 31.2 degC | 99912.5 Pa |
| 1744870153 | 4 V | 0 V | 252 mW | 31.1 degC | 99925 Pa |
| 1744870094 | 4 V | 0 V | 304 mW | 31.5 degC | 99925 Pa |
| 1744870054 | 4 V | 0 V | 294 mW | 31.5 degC | 99925 Pa |
| 1744869957 | 4 V | 0 V | 338 mW | 32.4 degC | 99925 Pa |
| 1744869953 | 4 V | 0 V | 440 mW | 32.4 degC | 99912.5 Pa |
| 1744869917 | 4 V | 0 V | 342 mW | 31.8 degC | 99925 Pa |
| 1744869824 | 4 V | 0 V | 308 mW | 31.3 degC | 99912.5 Pa |
| 1744869754 | 4 V | 0 V | 284 mW | 31.4 degC | 99925 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)