APRS Track Direct

My position About ☰

reset

YM4KBO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KBO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732289897	0 Pkt	5 Pkt	-82 dBm	0 V
1732289275	0 Pkt	5 Pkt	-80 dBm	0.02 V
1732288652	0 Pkt	3 Pkt	-79 dBm	0 V
1732288030	0 Pkt	5 Pkt	-81 dBm	0.04 V
1732287407	0 Pkt	4 Pkt	-81 dBm	0 V
1732286785	0 Pkt	5 Pkt	-81 dBm	0 V
1732286162	0 Pkt	4 Pkt	-81 dBm	0 V
1732285540	0 Pkt	5 Pkt	-86 dBm	0 V
1732284918	2 Pkt	6 Pkt	-86 dBm	0 V
1732284295	0 Pkt	3 Pkt	-80 dBm	0 V
1732283673	0 Pkt	5 Pkt	-83 dBm	0 V
1732283051	0 Pkt	5 Pkt	-83 dBm	0 V
1732282428	0 Pkt	6 Pkt	-80 dBm	0 V
1732281806	0 Pkt	6 Pkt	-78 dBm	0 V
1732281184	0 Pkt	4 Pkt	-85 dBm	0 V
1732280562	0 Pkt	4 Pkt	-78 dBm	0 V
1732279940	0 Pkt	6 Pkt	-82 dBm	0 V
1732279317	0 Pkt	6 Pkt	-78 dBm	0 V
1732278688	0 Pkt	5 Pkt	-79 dBm	0 V
1732278006	0 Pkt	4 Pkt	-86 dBm	0 V
1732277384	0 Pkt	7 Pkt	-78 dBm	0 V
1732276761	0 Pkt	5 Pkt	-83 dBm	0 V
1732276139	0 Pkt	4 Pkt	-80 dBm	0 V
1732275517	0 Pkt	6 Pkt	-86 dBm	0 V
1732274894	0 Pkt	6 Pkt	-81 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)