APRS Track Direct

My position About ☰

reset

E24BD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24BD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1750178976	6 Pkt	-56 dBm	5.33 V
1750178052	7 Pkt	-55 dBm	5.33 V
1750177126	8 Pkt	-58 dBm	5.33 V
1750176201	7 Pkt	-61 dBm	5.33 V
1750175276	5 Pkt	-54 dBm	5.33 V
1750174351	7 Pkt	-52 dBm	5.33 V
1750173426	5 Pkt	-54 dBm	5.31 V
1750172501	7 Pkt	-55 dBm	5.31 V
1750171577	5 Pkt	-55 dBm	5.33 V
1750170652	7 Pkt	-54 dBm	5.33 V
1750169725	8 Pkt	-55 dBm	5.46 V
1750168801	8 Pkt	-58 dBm	5.33 V
1750167874	6 Pkt	-60 dBm	5.31 V
1750166949	7 Pkt	-54 dBm	5.31 V
1750166025	8 Pkt	-53 dBm	5.31 V
1750165099	6 Pkt	-54 dBm	5.31 V
1750164174	7 Pkt	-57 dBm	5.33 V
1750163248	6 Pkt	-54 dBm	5.33 V
1750162323	8 Pkt	-56 dBm	5.33 V
1750161398	7 Pkt	-62 dBm	5.33 V
1750160473	8 Pkt	-61 dBm	5.48 V
1750159548	6 Pkt	-58 dBm	5.48 V
1750158623	7 Pkt	-57 dBm	5.48 V
1750157698	6 Pkt	-59 dBm	5.33 V
1750156773	7 Pkt	-59 dBm	5.48 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)