This is the latest recevied telemetry packets stored in our database for station/object WA9TT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754237993 | 402 | 646 | 0 | 0 | 0 |
| 1754237019 | 402 | 648 | 0 | 0 | 0 |
| 1754236978 | 402 | 647 | 0 | 0 | 0 |
| 1754236961 | 403 | 647 | 0 | 0 | 0 |
| 1754236953 | 402 | 647 | 0 | 0 | 0 |
| 1754236915 | 402 | 646 | 0 | 0 | 0 |
| 1754236896 | 401 | 646 | 0 | 0 | 0 |
| 1754236886 | 403 | 645 | 0 | 0 | 0 |
| 1754236784 | 403 | 642 | 0 | 0 | 0 |
| 1754236765 | 403 | 641 | 0 | 0 | 0 |
| 1754236754 | 469 | 640 | 0 | 0 | 0 |
| 1754236747 | 469 | 639 | 0 | 0 | 0 |
| 1754232835 | 468 | 604 | 0 | 0 | 0 |
| 1754232825 | 468 | 604 | 0 | 0 | 0 |
| 1754232821 | 469 | 604 | 0 | 0 | 0 |
| 1754232811 | 468 | 604 | 0 | 0 | 0 |
| 1754232739 | 467 | 602 | 0 | 0 | 0 |
| 1754232712 | 468 | 602 | 0 | 0 | 0 |
| 1754232678 | 468 | 601 | 0 | 0 | 0 |
| 1754232574 | 468 | 597 | 0 | 0 | 0 |
| 1754178808 | 407 | 619 | 0 | 0 | 0 |
| 1754178695 | 413 | 620 | 0 | 0 | 0 |
| 1754178686 | 408 | 620 | 0 | 0 | 0 |
| 1754178652 | 407 | 619 | 0 | 0 | 0 |
| 1754178629 | 408 | 619 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)