APRS Track Direct

My position About ☰

reset

VK3RMG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RMG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1758199410	22.5 Deg.C	13.1 Volts	49 PTT's	12	7
1758197610	22.5 Deg.C	13.1 Volts	47 PTT's	11	37
1758195810	23 Deg.C	13.1 Volts	36 PTT's	11	7
1758194010	23 Deg.C	13.1 Volts	38 PTT's	10	37
1758192210	23.5 Deg.C	13.1 Volts	37 PTT's	10	7
1758190410	23.5 Deg.C	13.1 Volts	44 PTT's	9	37
1758188611	23.5 Deg.C	13.1 Volts	47 PTT's	9	7
1758186812	23.5 Deg.C	13.1 Volts	62 PTT's	8	37
1758185011	23.5 Deg.C	13.1 Volts	52 PTT's	8	7
1758183211	23.5 Deg.C	13.1 Volts	61 PTT's	7	37
1758181411	24 Deg.C	13.1 Volts	79 PTT's	7	7
1758179611	24 Deg.C	13.1 Volts	60 PTT's	6	37
1758177813	24.5 Deg.C	13.1 Volts	69 PTT's	6	7
1758176011	24.5 Deg.C	13.1 Volts	49 PTT's	5	37
1758174212	24.5 Deg.C	13.1 Volts	68 PTT's	5	7
1758172411	24.5 Deg.C	13.1 Volts	82 PTT's	4	37
1758170611	24 Deg.C	13.1 Volts	37 PTT's	4	7
1758168811	24 Deg.C	13.1 Volts	45 PTT's	3	37
1758167012	24 Deg.C	13.1 Volts	40 PTT's	3	7
1758165214	24 Deg.C	13.1 Volts	56 PTT's	2	37
1758163411	24 Deg.C	13.1 Volts	45 PTT's	2	7
1758161612	24 Deg.C	13.1 Volts	55 PTT's	1	37
1758159811	24 Deg.C	13.1 Volts	46 PTT's	1	7
1758158012	23.5 Deg.C	13.1 Volts	50 PTT's	0	37
1758156212	23.5 Deg.C	13.1 Volts	67 PTT's	0	7

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)