APRS Track Direct

My position About ☰

reset

LU3MCV-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU3MCV-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774463130	1 Pkt	18 Pkt	6 Pkt	-41 dBm	13.39 V
1774462205	2 Pkt	16 Pkt	9 Pkt	-39 dBm	13.37 V
1774461255	2 Pkt	16 Pkt	8 Pkt	-41 dBm	13.37 V
1774460331	1 Pkt	19 Pkt	7 Pkt	-43 dBm	13.37 V
1774459405	2 Pkt	6 Pkt	6 Pkt	-40 dBm	13.39 V
1774458477	1 Pkt	8 Pkt	12 Pkt	-46 dBm	13.39 V
1774457552	1 Pkt	25 Pkt	14 Pkt	-48 dBm	13.39 V
1774456627	1 Pkt	8 Pkt	8 Pkt	-48 dBm	13.39 V
1774455702	0 Pkt	0 Pkt	1 Pkt	-48 dBm	13.39 V
1774455582	2 Pkt	9 Pkt	10 Pkt	-50 dBm	13.37 V
1774454656	0 Pkt	8 Pkt	9 Pkt	-48 dBm	13.37 V
1774453732	2 Pkt	8 Pkt	7 Pkt	-47 dBm	13.39 V
1774452806	2 Pkt	7 Pkt	6 Pkt	-48 dBm	13.39 V
1774451882	0 Pkt	1 Pkt	3 Pkt	-47 dBm	13.39 V
1774451262	2 Pkt	9 Pkt	13 Pkt	-48 dBm	13.39 V
1774450337	2 Pkt	6 Pkt	13 Pkt	-53 dBm	13.39 V
1774449412	1 Pkt	7 Pkt	9 Pkt	-48 dBm	13.39 V
1774448488	2 Pkt	5 Pkt	10 Pkt	-50 dBm	13.37 V
1774447562	1 Pkt	7 Pkt	12 Pkt	-48 dBm	13.37 V
1774446638	2 Pkt	6 Pkt	9 Pkt	-50 dBm	13.39 V
1774445714	1 Pkt	7 Pkt	10 Pkt	-49 dBm	13.39 V
1774444789	2 Pkt	6 Pkt	9 Pkt	-48 dBm	13.39 V
1774443865	1 Pkt	8 Pkt	10 Pkt	-51 dBm	13.37 V
1774442942	2 Pkt	13 Pkt	11 Pkt	-49 dBm	13.37 V
1774442018	3 Pkt	7 Pkt	5 Pkt	-48 dBm	13.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)