This is the latest recevied telemetry packets stored in our database for station/object PY2DGC-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774115502 | 0 | 46 | 0 | 7 | 0 |
| 1774114902 | 0 | 15 | 0 | 1 | 0 |
| 1774114302 | 0 | 32 | 0 | 3 | 0 |
| 1774113702 | 0 | 19 | 0 | 2 | 0 |
| 1774113102 | 0 | 48 | 0 | 5 | 0 |
| 1774112502 | 0 | 14 | 0 | 1 | 0 |
| 1774111902 | 0 | 38 | 0 | 2 | 0 |
| 1774111302 | 0 | 36 | 0 | 8 | 0 |
| 1774110702 | 0 | 29 | 0 | 3 | 0 |
| 1774110102 | 0 | 110 | 0 | 8 | 0 |
| 1774109502 | 0 | 923 | 0 | 14 | 0 |
| 1774108902 | 0 | 938 | 0 | 12 | 0 |
| 1774108302 | 0 | 921 | 0 | 14 | 0 |
| 1774107702 | 0 | 954 | 0 | 10 | 0 |
| 1774107102 | 0 | 910 | 0 | 13 | 0 |
| 1774106502 | 0 | 957 | 0 | 9 | 0 |
| 1774105902 | 0 | 526 | 0 | 7 | 0 |
| 1774105302 | 0 | 34 | 0 | 6 | 0 |
| 1774104702 | 0 | 118 | 0 | 23 | 0 |
| 1774104102 | 0 | 23 | 0 | 3 | 0 |
| 1774103502 | 0 | 17 | 0 | 1 | 0 |
| 1774102902 | 0 | 24 | 0 | 4 | 0 |
| 1774102302 | 0 | 15 | 0 | 1 | 0 |
| 1774101702 | 0 | 16 | 0 | 2 | 0 |
| 1774101102 | 0 | 143 | 0 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)