This is the latest recevied telemetry packets stored in our database for station/object OE1GKS-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1732307651 | 986.5 hPa | 23.3 C deg | 31.9 % | 1009.2 hPa | 0 C deg |
1732305851 | 986.3 hPa | 23.3 C deg | 31.9 % | 1009 hPa | 0 C deg |
1732300453 | 984.9 hPa | 23.5 C deg | 32.2 % | 1007.6 hPa | 0 C deg |
1732296849 | 984.2 hPa | 23.5 C deg | 32.3 % | 1006.8 hPa | 0 C deg |
1732293253 | 983.8 hPa | 23.7 C deg | 32.4 % | 1006.5 hPa | 0 C deg |
1732289649 | 982.8 hPa | 24 C deg | 32.5 % | 1005.3 hPa | 0 C deg |
1732287849 | 982.4 hPa | 24.2 C deg | 32.6 % | 1005 hPa | 0 C deg |
1732286049 | 982 hPa | 24.5 C deg | 32.7 % | 1004.5 hPa | 0 C deg |
1732284251 | 981.4 hPa | 24.6 C deg | 32.9 % | 1004 hPa | 0 C deg |
1732282448 | 980.9 hPa | 24.5 C deg | 33 % | 1003.4 hPa | 0 C deg |
1732280648 | 980 hPa | 24.4 C deg | 33 % | 1002.5 hPa | 0 C deg |
1732275251 | 979.3 hPa | 24.3 C deg | 31.3 % | 1001.8 hPa | 0 C deg |
1732271648 | 979.4 hPa | 24.1 C deg | 31.4 % | 1001.9 hPa | 0 C deg |
1732269848 | 978.9 hPa | 24.1 C deg | 31.4 % | 1001.4 hPa | 0 C deg |
1732268047 | 978.6 hPa | 24 C deg | 31.4 % | 1001.1 hPa | 0 C deg |
1732266246 | 978.5 hPa | 23.9 C deg | 31.3 % | 1001 hPa | 0 C deg |
1732264446 | 978 hPa | 23.8 C deg | 31.1 % | 1000.6 hPa | 0 C deg |
1732260849 | 977.7 hPa | 23.6 C deg | 30.9 % | 1000.2 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)